heading

Fuera de producción. Modelo sucesorio: NF-A9 PWM

Fuera de producción.

El clásico ventilador de 92 mm NF-B9 ha contribuido a fundamentar la reputación de Noctua como fabricante de primer nivel de componentes de refrigeración silenciosa de máxima calidad, y aún impresiona a los usuarios con su exquisito silencio y espectacular rendimiento. La nueva versión PWM integra el nuevo PWM IC, con diseño personalizado, para proporcionar un control automático completo y un consumo energético ultrarreducido. Dotado de los rodamientos SSO y 6 años de garantía del fabricante, el NF-B9 PWM es una elección de primera línea para las demandas más elevadas.
Detalles
Diseño probado del NF-B9

Diseño probado del NF-B9

Decenas de miles de entusiastas de la refrigeración silenciosa tienen fe ciega en el clásico NF-B9 de Noctua. Su impresionante silencio, excelente rendimiento y calidad impecable, probada a largo plazo, han convertido al B9 en la primera elección para la refrigeración silenciosa de 92 mm.
Extremos de las aspas biselados

Extremos de las aspas biselados

Al reducir la interacción crítica entre rotor y estator, los extremos de las aspas biselados del NF-B9 permiten combinar una superficie de aspas más amplia con un funcionamiento más silencioso y, de este modo, convertirse en piedra angular de la destacable eficiencia del ventilador.
Fentes Vortex-Control

Fentes Vortex-Control

Las Vortex-Control Notches (muescas de control de vórtice), seña de identidad de Noctua, dividen los vórtices de los extremos de los ejes y, por tanto, extienden la emisión sonora del ventilador en un rango de frecuencias más amplio. Esta medida hace que el sonido del NF-B9 PWM sea más agradable para el oído humano.
PWM IC de diseño personalizado con SCD

PWM IC de diseño personalizado con SCD

Al proporcionar control de la velocidad PWM completamente automático, el NF-F12 utiliza el nuevo diseño personalizado NE-FD1 PWM IC que integra la tecnología SCD (Smooth Commutation Drive). Al proporcionar impulsos de torsión más fluidos, SCD suprime los ruidos de conmutación y, por tanto, hace al ventilador más silencioso a velocidades bajas.
Adaptador para reducción del ruido

Adaptador para reducción del ruido

El NF-B9 PWM está provisto de un adaptador para reducción del ruido (LNA) que reduce la velocidad máxima del ventilador de 1600 a 1300 rpm. El LNA se puede utilizar bien para que el ventilador funcione a una velocidad fija de 1300 rpm o para limitar la velocidad máxima cuando se utiliza el control PWM automático.
Extensas opciones de cableado

Extensas opciones de cableado

El cable corto principal del ventilador, de 20 cm, minimiza la acumulación de cables en las aplicaciones típicas, mientras que el cable de extensión de 30 cm incluido proporciona un alcance mayor cuando sea necesario. Ambos cables están completamente enmallados y un cable de 4 pines en forma de Y permite conectar un segundo ventilador PWM al mismo conector del ventilador para obtener control automático.
Rodamientos SSO-Bearing

Rodamientos SSO-Bearing

La combinación del eficaz concepto de rodamientos hidrodinámicos con un imán adicional que apoya la autoestabilización del eje del rotor convierte a la tecnología SSO-Bearing de Noctua, de probada eficacia, en sinónimo de una operación sumamente silenciosa y una excepcional estabilidad a largo plazo.
6 años de garantía del fabricante

6 años de garantía del fabricante

Los ventiladores de Noctua son reconocidos por su impecable calidad y destacada longevidad. Al igual que todos los demás ventiladores Noctua, el NF-B9 ofrece un tiempo medio de vida entre fallos (MTBF) de más de 150 000 horas y viene con una garantía total del fabricante de 6 años.
NF-B9 PWM
Especificaciones ventilador
Dimensiones
92x92x25 mm
Espacio entre orificios de montaje
82,5x82,5 mm
Conexión
4 pines
Rodamiento
Geometría de las aspas
Velocidad de rotación (+/-10%)
1600 RPM
Velocidad de rotación con L.N.A. (+/-10%)
1300 RPM
Velocidad de rotación min. (PWM, +/-20%)
300 RPM
Sonoridad
17,6 dB(A)
Presión estático
1,61 mm H₂O
Presión estático con L.N.A.
1,09 mm H₂O
Potencia max.
0,96 W
Amperaje max.
0,08 A
Voltaje
12 V
MTTF
> 150.000 h
Volumen de entrega
  • Adaptador para reducción del ruido (L.N.A.)
  • Cable de 4 pines en forma de Y
  • Cable de extensión de 30 cm
  • 4 Vibration-Compensators
  • 4 tornillos de ventilador
Garantía
6 años
NF-B9 PWM
27.01.2013 // ElektronikTest.dk
test.gif

NF-B9 PWM Opinión

Så blev de montere og testet med bundkortets PWN styriign og det forløb uden problemer, jeg har ikke kunnet høre noget støj fra dem selvom de køre på fuld blæs.
Resultado del análisis: "Nu har jeg haft et par forskellige Noctua produkter i mellem hænderne og de har alle sammen gjort det rigtig godt. Deres kvalitet samt udvikling er noget af det jeg bider mærke i, her har de en stor fordel i at de ikke laver så mange nye produkter men i stedet optimerer og gør tingene bedre." (John Thorn, ElektronikTest.dk)
02.09.2012 // rbmods.com
test.gif

NF-B9 PWM Opinión

We plugged in the case fan slot of our motherboard and disabled the PWM function to use the fans at their full speed. We also tested the fans at PWM speeds and with L.N.A adapter without PWM. Noise levels with all the fans are similar. In PWM mode, with our test setup, the fans were running at minimum speed nearly the whole time. Only after extensive 3DMark Vantage sessions the fan speed rose above the minimum. Even then the fans were very silent. With L.N.A adapter one could barely hear the fans. When we disabled the PWM and ran the fans at 12V, they were clearly audible. However, increasing noise comes with increasing performance. We saw about 2C decrease in overall temperature of the case when using the 120mm fan as our exhaustfan compared to the situation where the same fan was used with L.N.A adapter or PWM. Yet again Noctua did not disappoint us. The quality is on par with previous incarnations of their fans and performance is also on a very good level.
Resultado del análisis: "If you can live with the pricetag Noctua is a great choice. All three fans were absolutely one of the most silent one’s I’ve encountered, and while there definitely are more powerful fans available – the Noctua fans should be more than enough for cooling your case, processor cooler or even your water coolers radiator. All the fans are PWM controlled so you can control their speeding behaviour from your bios or from your motherboards control utility in your operating system. I can recommend all these fans to whoever who is looking for silent, yet reasonably powerful fan, and does want the PWM feature. Noctua won’t let you down in terms of quality!" (Ville Ilonen, rbmods.com)
25.05.2012 // CoolingTechnique.com
test.gif

NF-B9 PWM Opinión

Tirare delle conclusioni sulle nuove proposte di Noctua non è decisamente semplice; la casa austriaca questa volta mette decisamente tanta carne al fuoco con un "know how" costruttivo che se paragonato a quello delle aziende concorrenti mette decisamente in imbarazzo per la propria superiorità in campo fluidodinamico e non solo. Partendo da un punto di vista meramente qualitativo, le ventole offerte dalla casa austriaca sono tutte dotate di un eccellente qualità dei materiali e costruttiva; tutte le saldature di interconnessione tra i profili palari e il rotore centrale vengono fatte in maniera pressochè perfetta, con margini di tolleranza ridotti all'osso e con una struttura nel complesso decisamente ben curata in ogni sua minima parte. A sostegno di cio c'è la cura quasi maniacale dedicata allo sleeving dei cavi di controllo e di alimentazione, essa viene effettuata con una calza in multifilamento ad alta copertura siliconata, terminata da generosi tratti di termorestringente nero che ne assicura la presa e la stabilità nel tempo; a ciò viene inoltre affiancata una sleevatura direttamente nel frame della ventola che prevede specifici ponti in plastica per il mantenimento in sede dei cavetti che vanno al motore SSO della casa.
Resultado del análisis: "Il lavoro impressionante effettuato da Noctua si vede infine nel grafico del pescaggio che solitamente pone come fanalino di coda le ventole aventi alte pressione statiche, questo con le ventole in oggetto non succede ma anzi le inserisce in vetta esaltando l'ottimo bilanciamento che gli ingegneri della casa sono riusciti a tirare fuori in maniera pressochè esemplare meritando sicuramente i nostri complimenti per il lavoro svolto." (Damiano Villa, CoolingTechnique.com)
30.04.2012 // islaBit.com
test.gif

NF-B9 PWM Opinión

El NOCTUA NF-B9 PWM es un ventilador de gama alta que está Recomendado por islaBit para equipos medianos, HTPC y torres pequeñas, además de pequeños radiadores o disipadores que necesiten un ventilador de 9cm con gran caudal y baja sonoridad. Además, este modelo se lleva el Premio Rendimiento islaBit, por incluir la tecnología PWM, su bajo consumo y por superar a la mayoría de ventiladores de 9cm que hay actualmente en el mercado, que tan solo son capaces de superar su caudal alcanzando ruidos de más de 29dBA, cuando este modelo contiene su nivel por debajo de los 18dBA de sonoridad máxima.
Resultado del análisis: "Si buscas un ventilador duradero de 9cm, con excelente relación rendimiento/sonoridad, el NF-B9 PWM de Noctua seguro que da la talla." (Raúl Planelles, islaBit.com)
24.04.2012 // HWMaster.com
test.gif

NF-B9 PWM Opinión

La NF-P12 PWM è ottima con dissipatori e radiatori, o come ventola per case, la NF-B9 PWM è una ventola destinata all’utilizzo su dissipatori per cpu di dimensioni inferiori o su dissipatori per vga, la NF-R8 PWM è perfetta per raffreddare in maniera concentrata un determinato componente (ram, chipset, vrm). I prezzi, in apparenza elevati, sono giustificati dal bundle ricco e dalla qualità costruttiva.
Resultado del análisis: "Con la nuova famiglia di ventole PWM, Noctua ha dotato arricchito tecnicamente le sue gia ottime ventole. I consumi sono stati ridotti visibilmente e c’è tutta la comodità del PWM. Consigliamo queste ventole a chiunque voglia raffreddare in maniera efficiente il proprio computer, sena rinunciare al silenzio." (Rocco Eduardo Battista, HWMaster.com)
05.04.2012 // Whitex-Modd.de
test.gif

NF-B9 PWM Opinión

Ebenfalls werden im Video alle Modelle mit einem einfachen Mikrofon, das die Lautstärke aus 10cm Entfernung misst, auf ihr Geräuschlevel getestet. Um eine weitere Orientierung im Sinne der Geräuschkulisse zu geben, haben wir zusätzlich 3 weitere Lüfter (Sharkon Silent Eagle 2000-80mm, 2000rpm @38,5m³/h, Enermax Magma-120mm, 1500rpm @117,49m³/h und ein standart-Gehäuselüfter-120mm, 1000rpm) sowie eine etwas ältere und lautere IDE-Festplatte @7200rpm dem Lautstärketest unterzogen. Schlussfolgernd kann man an dieser Stelle sagen, dass die Lüfter alle sehr gut abgeschnitten haben.
Resultado del análisis: "Oft sind Markenlüfter überteuert und der Preis ist nicht gerechtfertigt. Ob es sich allerdings lohnt, etwas mehr Geld für Noctua-Produkte auszugeben? -Wir sagen: Ja! Die neue Lüfterserie ist aus unserer Sicht eine klare Kaufempfehlung und man hört die Qualität im wahrsten Sinne des Wortes heraus." (Tobi Borho, Whitex-Modd.de)
19.03.2012 // PCEkspert.com
test.gif

NF-B9 PWM Opinión

Kvaliteta izrade i materijala, kako P12, tako i B9 i R8 je na najvišoj razini. Priložena oprema (Y-adapteri, L.N. adapteri, produžni napojni kabel, vijci i gumeni čepići) je bogata, a u korisničkim nam se uputama najviše sviđa objašnjenje o održavanju ventilatora. Šlag na tortu je šest godišnje jamstvo proizvođača.
Resultado del análisis: "svakako je riječ o proizvodima koji su u vrhu svojih klasa." (Krešimir Matanović, PCEkspert.com)
08.03.2012 // 1et2.it
test.gif

NF-B9 PWM Opinión

La ventola Noctua NF-B9 PWM ha una rotazione massima a 12 Volt di 1600 rpm (rotazioni per minuto) e a tale velocità produce un flusso d’aria potente ed elevato e il rumore che si percepisce è quello di una turbolenza ovattata a toni bassi: più un tono è basso e meno è percepito come disturbante. Questo è il risultato della ricerca condotta da Noctua per migliorare le sue ventole: nessuna ventola ad alte velocità sarà mai completamente silenziosa, ma lavorare sulla riduzione dei flussi turbolenti ha portato proprio a questo “suono” che è tipico delle ventole Noctua e che è diventato un vanto riconosciuto a livello mondiale.
Resultado del análisis: "La ventola Noctua NF-B9 PWM è chiaramente un prodotto eccellente che vanta caratteristiche uniche. La silenziosità a bassi regimi è garantita (pure nel tempo) per un utilizzo in ambienti dove il silenzio deve regnare senza però rinunciare al raffreddamento dei componenti del computer (per esempio un HTPC). Ma anche quando le condizioni richiedono un flusso maggiore di aria, la Noctua NF-B9 PWM sa dimostrarsi all’altezza mantenendo comunque basso e ovattato il rumore." (Massimo Maccalli, 1et2.it)
20.02.2012 // TodoHTPC.com
test.gif

NF-B9 PWM Opinión

Yo diría que es casi imposible equivocarte al comprarte un equipo de Noctua. Y con el NF-B9 PWM se vuelve a comprobar que Noctua sigue en lo mas alto de la disipación por aire. El NF-B9 incorpora las últimas tecnología desarrolladas por Noctua, todas ellas orientadas a maximizar el rendimiento y minimizar el ruido. La última de ellas es el controlador PWM NE-FD1, que permite reducir el nivel sonoro y optimizar el consumo. Esta es la principal diferencia con respecto a su predecesor NF-B9. Noctua ha incorporado todo tipo de adaptadores y tornillos necesarios para la instalación del ventilador. Incluso un pequeño manual nos explicará como colocar el ventilador Una vez instalado el resultado no puede ser mejor, es casi imposible escuchar el ventilador. En nuestro caso consigue mantener perfectamente refrigerado un equipo completo. El precio es quizás lo único que puede echarnos atrás, ronda los 20 Euros. Es un precio alto si lo comparamos con otros ventiladores, pero el silencio y la disipación que ofrece son difíciles de obtener.
Resultado del análisis: "En resumen, si necesitamos un ventilador de caja de 92mm el NF-B9 PWM es casi con total seguridad el mejor ventilador. Gracias a la tecnología de Noctua, es difícil escucharlo y la refrigeración es fantástica. Desde TodoHTPC ha obtenido nuestro sello de producto recomendado." (Abel Hernández Valero, TodoHTPC.com)
15.02.2012 // HardZone.es
test.gif

NF-B9 PWM Opinión

A mínimas revoluciones es inaudible, y ya a estas rpm mueve un buen flujo de aire. Conectado a la placa base por PWM comienza a notarse el ruido del aire pasando por las aspas, pero es algo que dentro de una caja ni se notaría.
Resultado del análisis: "Una vez más, Noctua lo ha vuelto a lograr: ha mejorado algo que ya de por sí era sobresaliente. Los nuevos ventiladores de Noctua ahora cuentan con el valor añadido de que pueden ser controlados directamente por la placa base del ordenador en función de la temperatura. Silenciosos y potentes, los nuevos ventiladores de Noctua con función PWM no defraudarán a nadie." (Rodrigo Alonso, HardZone.es)

Manual de instalación (PDF)

Hoja de datos (PDF)

How big is the NH-D15S and how much clearance does it provide for RAM and mainboard heatsinks? Copy

Yes, Low-Noise Adaptors (L.N.A.s) can be used with y-cables, but please make sure to use one L.N.A. per fan and to place the L.N.A.s between the y-cable and the fans as shown below. Never use one L.N.A. for two (or more fans) by placing it between the mainboard and the y-cable!

D15S

Can I disassemble my fan for cleaning (or other purposes, e.g. painting)?

In order to ensure flawless operation over many years of usage, all Noctua fans come with a premium grade SSO bearing, which is fully sealed to prevent the entering of fine dust particles. Please note that the fan is not designed to be taken apart by the user. Removing the impeller from the frame will break the sealing of the bearing and results in a loss of warranty.

It is thus recommended to clean your fans using a duster, slightly moist tissue or canned air. Please be careful not to use too much force in order to prevent any damage to the fan. Please don’t use a vacuum cleaner as this may apply excessive force to the fan.

Can I run 4-pin PWM fans on 3-pin fan headers?

PWM fans come with a 4-pin connectors for fully automatic speed control via your mainboard’s 4-pin PWM fan headers. Please note that 4-pin fans can also be connected to your mainboard’s 3-pin fan headers though. When connected to 3-pin fan headers, the fan will run at full speed (unless the mainboard supports voltage based speed control).

What pin configuration do Noctua 12V fans use?

All Noctua fans feature the standard pin-configurations set out in the Intel and AMD specifications. These standard pin-configurations are used on most mainboards and fan controllers today:

pin configuration

How should I clean my Noctua fan?

Fans inside computer cases tend to accumulate dust over longer periods of usage. In order to maintain maximum performance, please clean your fans regularly using a duster, slightly moist tissue or canned air. Please be careful not to use too much force in order to prevent any damage to the fan. Please do not use a vacuum cleaner as this may apply excessive force to the fan and do not put the fan under running water as water residues inside the motor may lead to short circuits.
In order to ensure flawless operation over many years of usage, Noctua’s premium grade SSO bearings are fully sealed to prevent the entering of fine dust particles. Please note that the fan is not designed to be taken apart by the user. Removing the impeller from the frame will break the sealing of the bearing and results in a loss of warranty.

How can I check if my 4-pin fan header supports PWM?

Some mainboards feature 4-pin fan headers that actually don‘t use a PWM signal on Pin 4 to control the fan speed but rather reduce the voltage on Pin 2 (like a standard 3-pin fan header). As the fan speed at minimum voltage is usually higher than the speed at 20% PWM duty cycle, the fan can not reach as low minimum speeds under voltage control as under PWM control. Please refer to your mainboard manual to check whether or not your mainboard has 4-pin fan headers that control the fan speed by reducing voltage on Pin 2 rather than by changing the PWM duty cycle on Pin 4:

4 pin fan header types

Note that mainboard manufacturers use different terms to indicate that Pin 4 is not being used for PWM control (e.g. “+5V”, “VCC” or “NC”), but if one of these terms is used, you can be sure that the fan header does not support PWM. If Pin 4 is described as “Speed Control” or “PWM” or the like, you can be sure that the fan header supports PWM.

Unfortunately, the description of Pin 2 is not always a clear indication as some manufacturers use terms such as “Fan PWR” or “Power” for both types of fan headers. However, if Pin 2 is described as “Speed Control”, you can also be sure that the fan header does not support PWM based speed control. If Pin 2 is described as “+12V”, this is a clear indication that the fan header supports PWM.

Please also note that in some cases, the descriptions of the pin layouts in the mainboard manuals may not be correct and some models actually allow you to switch the fan headers from voltage control mode to PWM control mode in the BIOS even though the pin descriptions do not indicate PWM support. We thus recommend to look for these options in the BIOS before taking other measures. In case of doubt, please contact your mainboard manufacturer.


If your mainboard features other 4-pin fan headers that use PWM for speed control, you can run multiple fans from these headers using Y-split cables. Make sure not to exceed the specified maximum power draw of the fan headers (usually 10-12W) though.

Which Noctua fan or CPU cooler should I buy? How to choose the right model?

Not sure which Noctua product to buy? Our detailed buying guides for fans and CPU coolers help you to choose the model that works best for you.

Can Noctua fans be used to replace noisy stock fans in NAS devices?

Noctua fans such as the 40, 60, 80 or 92mm NF-A series models are ideal for replacing noisy stock fans in NAS devices in order to make them quieter and thousands of users have managed to significantly reduce the noise levels of their NAS units this way. However, while it is easy and straightforward to replace the fans in some cases, it can be very difficult in others, so Noctua strongly recommends that users carefully research if it is possible to easily replace the fan(s) of their NAS device before purchasing a Noctua fan for this purpose. Some of the common issues that can occur when replacing NAS fans are:

  • Different pin assignment: Whereas Noctua fans use the standardised pin assignment for PC fans (see this FAQ for details), some NAS units use different assignments. For example, some devices have the power and GND or rpm and PWM pins swapped. Therefore please carefully verify that your NAS device uses the same pin assignment as standard fans. Experienced users may also change the pin assignment by cutting and resoldering the fan cables, but please note that this will void your Noctua manufacturer’s warranty.
  • Different pin functions: Noctua fans use the standardised pin functions for PC fans (see this FAQ for details); however, some NAS units use fans where certain pins serve a different function. For example, some devices use the RPM pin for “power good” signals. Therefore please carefully verify that your NAS device uses the same pin functions.
  • Firmware speed control: Some NAS devices demand a certain maximum or minimum fan speed. If the new fan doesn’t have the same or similar maximum or minimum speed, the device may display errors or even shut down.
  • Different starting voltage: Most NAS devices use voltage-based speed control. If the new fan has a higher starting voltage than the original fan, it may not start up right away. This may lead the NAS device to display errors or even shut down because it suspects a fan failure.
  • Different power draw: Some NAS devices monitor the fan’s power draw. If the new fan has a lower power consumption than the stock fan, the device might display errors or even shut down.

Please note that most NAS manufacturers don’t provide detailed documentation regarding fan compatibility and control, so users who want to replace the fans of their devices usually have to rely on “How to” guides, blog and forum posts or video tutorials. For example, there are excellent video tutorials available for changing the fans in popular Synology NAS models (DS416j, DS1515+ and DS1812+ in English, DS416/DS415/DS916/DS216/DS214 and DS1515+ in German). Please also note that fan compatibility and control can vary from model to model and even from revision to revision even if the devices stem from the same manufacturer. As a result, it is important to make sure that the information or guidelines you rely on when replacing your NAS fan are applicable to your specific model as well as your specific hardware and firmware revision.

Due to the possible issues listed above, Noctua recommends that only experienced users attempt to replace their NAS fans. Please note that since there are so many different NAS models and most of them lack documentation for aspects such as fan compatibility and control, Noctua customer support cannot assist you with compatibility issues when replacing NAS fans. Please contact your NAS manufacturer for any questions regarding aspects such as the device’s pin alignment or fan monitoring and control.

Can I use Noctua fans in my system from Acer, Apple, Dell, HP, Lenovo or other major brands?

Noctua 12V fans comply with the established specifications for standard PC systems issued by Intel and AMD. Systems from Acer, Apple, Dell, HP, Lenovo or other major brands often deviate from these specifications e.g. by using proprietary fan headers, custom pin-alignments or pin-configurations, different methods of fan speed control, etc. This can lead to compatibility issues when using Noctua fans in systems from said brands. Some of these problems can be avoided with some technical knowledge, but especially BIOS related issues (e.g. errors or shutdowns due to low fan speed) can often not be resolved. As a result, Noctua does not officially support systems from Acer, Apple, Dell, HP, Lenovo or other major brands.

Can Noctua fans be used to replace noisy stock fans in switches, routers or other network devices?

Noctua fans such as the 40, 60, 80 or 92mm NF-A series models are ideal for replacing noisy stock fans in switches, routers and other network devices in order to make them quieter and thousands of users have managed to significantly reduce the noise levels of their units this way. However, while it is easy and straightforward to replace the fans in some cases, it can be very difficult in others, so Noctua strongly recommends that users carefully research if it is possible to easily replace the fan(s) of their network device before purchasing a Noctua fan for this purpose. Some of the common issues that can occur when replacing pre-installed fans are:

  • Different pin assignment: Whereas Noctua fans use the standardised pin assignment for PC fans (see this FAQ for details), some network devices use different assignments. For example, some devices have the power and GND or rpm and PWM pins swapped. Therefore please carefully verify that your device uses the same pin assignment as standard fans. Experienced users may also change the pin assignment by cutting and resoldering the fan cables, but please note that this will void your Noctua manufacturer’s warranty.
  • Different pin functions: Noctua fans use the standardised pin functions for PC fans (see this FAQ for details); however, some network devices use fans where certain pins serve a different function. For example, some devices use the RPM pin for “power good” signals. Therefore please carefully verify that your device uses the same pin functions.
  • Firmware speed control: Some network devices demand a certain maximum or minimum fan speed. If the new fan doesn’t have the same or similar maximum or minimum speed, the device may display errors or even shut down.
  • Different starting voltage: Most network devices use voltage-based speed control. If the new fan has a higher starting voltage than the original fan, it may not start up right away. This may lead the device to display errors or even shut down because it suspects a fan failure.
  • Different power draw: Some network devices monitor the fan’s power draw. If the new fan has a lower power consumption than the stock fan, the device might display errors or even shut down.

Please note that most network device manufacturers don’t provide detailed documentation regarding fan compatibility and control, so users who want to replace the fans of their devices usually have to rely on “How to” guides, blog and forum posts or video tutorials. Please also note that fan compatibility and control can vary from model to model and even from revision to revision even if the devices stem from the same manufacturer. As a result, it is important to make sure that the information or guidelines you rely on when replacing your fans are applicable to your specific model as well as your specific hardware and firmware revision.

Due to the possible issues listed above, Noctua recommends that only experienced users attempt to replace their pre-installed fans in network devices. Please note that since there are so many different devices and most of them lack documentation for aspects such as fan compatibility and control, Noctua customer support cannot assist you with compatibility issues when replacing pre-installed fans. Please contact your network device manufacturer for any questions regarding aspects such as the device’s pin alignment or fan monitoring and control.

¿Tiene alguna pregunta sobre uno de nuestros productos? ¡Por favor use este formulario para enviar una pregunta!