heading

Dotado de medidas avanzadas de diseño aerodinámico, como los Flow Acceleration Channels (Canales de Circulación Acelerada) y el marco AAO, el NF-A4x10 5V es la versión de 5V del ventilador silencioso, de primera calidad y altamente optimizado de 40 x 10 mm de Noctua. La tecnología Smooth Commutation Drive y los rodamiento SSO2 de referencia de Noctua garantizan una fluidez de funcionamiento espectacular y una excelente estabilidad a largo plazo. Gracias a que está dotado de cables modulares, del conjunto de adaptador OmniJoin™, así como de 6 años de garantía del fabricante, el NF-A4x10 5V es la mejor elección para las aplicaciones de 5V más solicitadas.


  Al ser un ventilador de 5V, el NF-A4x10 5V no puede utilizarse a 12V, por lo que se dañará si se utiliza una fuente de alimentación de 12V como los conectores de los ventiladores de la placa base de los PC.
Detalles
Versión de 5 voltios

Versión de 5 voltios

Muchos dispositivos, como las soluciones de red y almacenamiento, utilizan ventiladores de 40 mm de 5 voltios. Con el mismo voltaje de funcionamiento e incluyendo el conjunto de adaptador OmniJoin™, que lo hace compatible con conectores propietarios del ventilador, el NF-A4x10 5V es ideal para reemplazar los ventiladores de 40 mm de 5V que hagan ruido o que estén estropeados.
Canales de aceleración del flujo

Canales de aceleración del flujo

El impulsor del NF-A4x10 cuenta con canales de aceleración del flujo en el lado de succión. Al acelerar el flujo de aire en la parte exterior de las aspas más importante, se reduce la separación del flujo en el lado de succión y, por tanto, se consigue una mejor eficiencia y menor ruido de vórtice.
Tamaño reducido del cubo del motor

Tamaño reducido del cubo del motor

Gracias a su diseño simplificado y compacto del motor, el cubo del motor del NF-A4x10 es más pequeño que el de los ventiladores convencionales de 4 cm. Esto hace posible una superficie de aspas mayor y, por tanto, contribuye al mayor flujo de aire y rendimiento de presión del ventilador.
Marco AAO

Marco AAO

Los marcos AAO (optimización acústica avanzada) de Noctua cuentan con almohadillas antivibración integradas, así como con el diseño de entrada paso a paso y las microestructuras de superficie internas (ambos propiedad de Noctua), que perfeccionan aún más la eficiencia sonora y el rendimiento del ventilador.
Diseño de entrada paso a paso

Diseño de entrada paso a paso

El diseño de entrada paso a paso de Noctua añade turbulencia a la entrada de aire para facilitar la transición de flujo laminar a flujo turbulento, lo que reduce el ruido de entrada tonal, mejora la adjunción de flujo e incrementa la capacidad de succión, especialmente en entornos con espacio restringido.
Microestructuras de superficie interna

Microestructuras de superficie interna

Con los extremos de las aspas del ventilador en colisión con la capa límite creada por las Inner Surface Microstructures (microestructuras de superficie interna), la separación del flujo desde el lado de succión de las aspas mengua de forma significativa, lo que resulta en un ruido de paso entre las aspas menor, mejor flujo de aire y mayor eficiencia de presión.
Almohadillas antivibración integradas

Almohadillas antivibración integradas

Las almohadillas antivibración integradas, fabricadas en silicona extrasuave, minimizan la transmisión de las vibraciones por minuto, a la vez que mantienen la compatibilidad con todos los tornillos estándar y otros sistemas de montaje.
Smooth Commutation Drive 2

Smooth Commutation Drive 2

La última versión del avanzado sistema Smooth Commutation Drive de Noctua asegura una fluidez de funcionamiento espectacular al eliminar las variaciones de torsión y los ruidos de conmutación. Esto hace al NF-A4x10 notablemente silencioso incluso en distancias muy cortas.
Rodamientos SSO2

Rodamientos SSO2

El NF-A4x10 cuenta con la segunda generación, aún más optimizada, de los renombrados rodamientos SSO de Noctua, de eficacia probada. Con SSO2, el imán trasero se coloca más cerca del eje para proporcionar mejor estabilización, precisión y durabilidad.
Adaptador de 3 a 2 pines y protección contra polaridad

Adaptador de 3 a 2 pines y protección contra polaridad

El NF-A4x10 incluye un adaptador de Molex de 3 pines a los conectores de 2 pines utilizados en muchas tarjetas gráficas, o en dispositivos de red y almacenamiento. Un diodo integrado proporciona protección contra la polaridad en las conexiones de 2 pines.
Conjunto de adaptador OmniJoin

Conjunto de adaptador OmniJoin

Muchos dispositivos dotados de ventiladores de 40 mm utilizan conectores de ventilador propietarios, por lo que el NF-A4x10 incluye un conjunto adaptador OmniJoin de Noctua. Solo ha de cortar el cable original del ventilador, fijarlo al adaptador mediante los conectores 3M Scotchlok™ incluidos, y podrá conectar el NF-A4x10 a los conectores propietarios del ventilador.
Extensas opciones de cableado

Extensas opciones de cableado

El cable corto principal del ventilador, de 20 cm, minimiza la acumulación de cables en las aplicaciones típicas, mientras que el cable de extensión de 30 cm incluido proporciona un alcance mayor cuando sea necesario. Los dos cables están completamente enmallados.
6 años de garantía del fabricante

6 años de garantía del fabricante

Los ventiladores de Noctua son reconocidos por su impecable calidad y destacada longevidad. Al igual que todos los demás ventiladores Noctua, el NF-A4x10 ofrece un tiempo medio de vida entre fallos (MTBF) de más de 150 000 horas y viene con una garantía total del fabricante de 6 años.
NF-A4x10 5V
Especificaciones ventilador
Dimensiones
40x40x10 mm
Espacio entre orificios de montaje
32x32 mm
Conexión
3 pines
Rodamiento
Geometría de las aspas
Tecnología del marco
Velocidad de rotación (+/-10%)
4500 RPM
Sonoridad
17,9 dB(A)
Presión estático
1,78 mm H₂O
Potencia max.
0,25 W
Amperaje max.
0,05 A
Voltaje
5 V
MTTF
> 150.000 h
Volumen de entrega
  • Adaptador de 3 a 2 pines
  • Conjunto de adaptador OmniJoin
  • Cable de extensión de 30 cm
  • 4 Vibration-Compensators
  • 4 tornillos de ventilador
Garantía
6 años
NF-A4x10 5V
A-Series fans
10.05.2014 // Vortez.net
test.gif

NF-A4x10 5V Opinión

+ They are quiet fans.
+ They have pretty good output for being so quiet.
+ They come in resilient packaging.
+ They come with well-chosen accessories.
Resultado del análisis: "Noctua started with really good fans, and made them better. One thing that strikes you if you handle the old fans is that they are very good fans, so it makes sense that Noctua still sells them in their redux line. But these A-Series fans are even better, and well can they join their big brothers in the A-Series lineup." (Ed Hume, Vortez.net)
03.03.2015 // PureOverclock.com
test.gif

NF-A4x10 5V Opinión

As always, sound levels are superb with these fans. While my opinions are subjective, what I found was after 45 dBs, that’s when I felt a fan was getting too noisy. Nothing about the Noctuas sounded too loud while testing them even at max speed, but with the plethora of LNAs and ULNAs to add to the fans, even if you didn’t have a way to control the fans it was unlikely you couldn’t tone them down to where you would be happy with them.
Resultado del análisis: "Overall, I believe Noctua makes an excellent product. There really isn’t anything I can complain about except for the price, and even then the price is understandable. If you need good air flow, low noise and have a small form factor case that needs some better fans, I could definitely recommend what Noctua has to offer here." (Josh Jackson, PureOverclock.com)
09.02.2015 // QWERTYmag.it
test.gif

NF-A4x10 5V Opinión

In questa recensione ci siamo realmente resi conto di quanto Noctua sia attenta ai dettagli e alla cura dei propri prodotti anche in delle “semplici” ventole che poi, in questo caso specifico, semplici non sono visto l’elevata cura nella produzione e nelle tecnologie adottate. Ci ha stupito moltissimo il fatto di ritrovare tutte le tecnologie citate nell’introduzione anche nelle ventole di dimensione ridotta come le NF-A4. Siamo decisamente soddisfatti sia dalle prestazioni in termini di efficienza/rumore, sia dal bundle che dai prezzi decisamente in linea con quelli di altri produttori ma assolutamente superiori in termini di caratteristiche e prestazioni. Attribuiamo a tutta la NF-A Series il premio Gold Award per l’innovazione tecnologica e la cura dei particolari che L’azienda ha dimostrato in questa serie di ventole super-efficienti.
Resultado del análisis: "Ventole per ogni tipo di esigenza. Noctua con la serie NF-A ha pensato proprio a tutti e a tutto proponendo prodotti di altissima qualità e tecnologia mantenendo un ottimo rapporto qualità/prezzo. Decisamente apprezzata la cura dei dettagli e del bundle che rendoni queste ventole il TOP DI GAMMA sul mercato." (Davide Torno, QWERTYmag.it)
07.01.2015 // Neoseeker.com
test.gif

NF-A4x10 5V Opinión

After studying the Noctua A-series Premium fans for the last few weeks, I have begun to understand how each design feature performs their function. As noted in the following paragraphs, each feature adds to the overall function of noise reduction, therefore improving air flow and performance efficiency. The Noctua Advanced Acoustic Optimization Frame has anti-vibration pads in each mounting flange corner. This feature not only reduces vibration noise transferring from the fan, but also into the fan from wobbly case components. The Stepped Inlet Design on the fan case edge turns the air flow from laminar to turbulent, reducing the tonal intake noise. The Inner Surface Microstructures next cause a boundary layer to reduce suction side flow separation as the fan blade tips pass, reducing the blade passing noise with improved air flow. The Flow Acceleration Channels on the fan blades cause the outer blade region air flow to speed up, reducing vortex noise of the fan blades while improving efficiency. Moving the magnet of the Noctua renowned SSO Bearing closer to the axis of the bearing improves stabilization, precision and durability. All of these features and more are packaged with many accessories for each fan, plus Noctua provides a 6 year warranty.
Resultado del análisis: "Noctua A-series Premium fans are looking like the right choice for your new or replacement case fan." (Marvin Purdy, Neoseeker.com)
14.11.2014 // Modders-Inc.com
test.gif

NF-A4x10 5V Opinión

Aside from the lower temperature, the A9 fans have a more “spread out” sound signature even though it is running at a higher RPM and has lesser high pitched noises across various speeds. The extra padded corners also help in giving extra space when positioned in a “pull” position minimizing noise. The smaller form factors and compact builds are much more common now than ever before with many users opting to build desktops that can be portable for LAN parties or for discreet integration in their living room as an HTPC. The A9 and A8 series fans fit these application well with excellent performance and low noise profiles that is even more flexible if need be. For storage or, spot cooling or component cooling in even tighter spaces, the A4 series offers a rare and impressive feature set that is above what most people would expect from something this small.
Resultado del análisis: "These A-series fans also enjoy the same set of low noise features and premium build quality that the other Noctua fan series provides, including the impressive 6-year warranty and extensive accessory package." (Ron Perillo, Modders-Inc.com)
22.10.2014 // El Chapuzas Informático
test.gif

NF-A4x10 5V Opinión

Como podemos comprobar, los modelos de 80 y 92 mm son completamente silenciosos, pero el modelo de 40 mm es algo ruidoso como cabe esperar para sus 4500 RPM máximas. Es curioso además ver el gran flujo de aire que ofrece el modelo A4, pues es capaz de moverse solo con gran facilidad.
Resultado del análisis: "Los ventiladores Noctua NF-A4/A8/A9 demuestran una vez más el buen hacer de Noctua, pues ofrecen un gran rendimiento con una sonoridad mínima. Además, llegan acompañados de un excelente kit de accesorios, algo de lo que pocas marcas pueden presumir." (Iván Martínez, El Chapuzas Informático)
11.05.2014 // Hardware-360
test.gif

NF-A4x10 5V Opinión

Stock performance shows a 3 degree drop with the A9 fans on heatsink use and up to 2 degrees under FPU only loads. Noise performance is superior in the NF-A9, despite the higher RPM with a smoother PWM operation and lesser high pitched noises across various speeds. The extra padded corners also help in giving extra space when positioned in a pull position minimizing noise. Ultimately each fan size has its own application depending on the chassis or heatsink applied to, although the smaller A4 5V fan is more suitable for storage cooling but will not look out of place as a chipset or spot cooler as well, especially the 12V version for added flexibility. The 92mm and 80mm A9 and A8 have a very balanced performance as both heatsink fans or case fans with their wide fan blade and excellent static pressure performance. The further lowered noise compared to the B9 and R8 series is a welcome change because the original fans were not particularly troublesome at all when it came to noise either. The integrated padded corners also work very well for noise dampening, especially when positioned as a “pull” fan since there is an added space that minimizes high pitched noises typically present in high-RPM performance fans when placed in this position.
Resultado del análisis: "As with all Noctua fans, they come with premium pricing as they come in premium packaging and feature set so they are not easily affordable. The good thing is that the 6-year warranty found on larger Noctua fans also apply to the A9, A8 and A4 series, as well as the premium accessories that come out of the box." (Ron Perillo, Hardware-360)
08.11.2015 // AndroidPC.es
test.gif

NF-A4x10 5V Opinión

Después de probar los modelos NF-A6x25 PWM, NF-A6x25 FLX, NF-A4x10 FLX y NF-A4x10 5V nos dan ganas de dejar un ventilador en nuestras placas pasivas, pero preferimos no hacerlo, como ya sabéis nos gustan los sistemas pasivos. Ciertamente es estos productos pueden ofrecen una mejora térmica en nuestros dispositivos si vamos a exprimirlos y además no nos molestan con ruidos. Si tenemos algún modelo pasivo con problemas térmicos añadirle un pequeño ventilador bien dimensionado siempre es una solución, sobretodo si tienen la calidad de estos modelos.
Resultado del análisis: "Los recomendamos sin ninguna duda para quien quiera mejorar el rendimiento de su miniPC o AndroidPC con problemas térmicos." (Joaquin Prida Trujillo, AndroidPC.es)
26.06.2015 // TugaReviews.com
test.gif

NF-A4x10 5V Opinión

Como é habitual a Noctua apresentou-nos excelentes ventoinhas para qualquer tipo de configuração, desde da qualidade de construção até a performance e não esquecendo os acessórios que completam este produto, as ventoinhas Noctua são algo que os entusiastas e até o utilizador comum devem ter em pensamento quando quiserem qualidade e performance até ao ultimo milímetro. Juntando toda a nova tecnologia, a Noctua obteve excelentes resultados e isso está a olhos vistos, a marca é conhecida por ser eximia nos seus produtos, e podemos comprovar isso ao testar estas excelentes ventoinhas.
Resultado del análisis: "Para finalizar só me resta dar a pontuação que estes excelentes produtos merecem, mais uma vez, a Noctua arrecada mais uma vez o ouro devido a sua excelente qualidade e eficácia." (Napoleão Silva, TugaReviews.com)
10.05.2015 // PC Ekspert
test.gif

NF-A4x10 5V Opinión

Kvaliteta materijala i izrade je nešto na što Noctua posebno pazi a to se odrazilo i na ove nove modele. Performanse svih modela su u skladu s onime što deklarira proizvođač i kod Noctue se dobiva točno ono što se i plaća. PWM hladnjaci su po običaju na maksimalnom broju okretaja malo čujniji, no performanse se ne gube nimalo uz upotrebu L.N. adaptera pri čemu se buka ipak dosta smanji.
Resultado del análisis: "Sve u svemu, Noctua uspješno nadograđuje svoj lineup i kupci će kao i uvijek biti vrlo zadovoljni." (Krešimir Matanović, PC Ekspert)

NA-SEC2

  • Cables de extensión de 3 pines
NF-A4x10 5V

NA-SYC2

  • Cables con forma de Y de 3 pines
NF-A4x10 5V

NA-SAV4

  • 16 soportes de silicona anti-vibración NA-AV4 para hasta 4 ventiladores
  • Terminación de caja plana para un aspecto exterior más despejado
  • Cinco gatillos definidos y numerados
  • Compatibles con todos los ventiladores de Noctua
NF-A4x10 5V

Manual de instalación (PDF)

Hoja de datos (PDF)

What pin configuration do Noctua 5V fans use?

The pin configuration of Noctua 5V fans is identical to 12V fans:

5v pin configuration

Can I use Noctua fans in my system from Acer, Apple, Dell, HP, Lenovo or other major brands?

Noctua 12V fans comply with the established specifications for standard PC systems issued by Intel and AMD. Systems from Acer, Apple, Dell, HP, Lenovo or other major brands often deviate from these specifications e.g. by using proprietary fan headers, custom pin-alignments or pin-configurations, different methods of fan speed control, etc. This can lead to compatibility issues when using Noctua fans in systems from said brands. Some of these problems can be avoided with some technical knowledge, but especially BIOS related issues (e.g. errors or shutdowns due to low fan speed) can often not be resolved. As a result, Noctua does not officially support systems from Acer, Apple, Dell, HP, Lenovo or other major brands.

Can Noctua fans be used to replace noisy stock fans in NAS devices?

Noctua fans such as the 40, 60, 80 or 92mm NF-A series models are ideal for replacing noisy stock fans in NAS devices in order to make them quieter and thousands of users have managed to significantly reduce the noise levels of their NAS units this way. However, while it is easy and straightforward to replace the fans in some cases, it can be very difficult in others, so Noctua strongly recommends that users carefully research if it is possible to easily replace the fan(s) of their NAS device before purchasing a Noctua fan for this purpose. Some of the common issues that can occur when replacing NAS fans are:

  • Different pin assignment: Whereas Noctua fans use the standardised pin assignment for PC fans (see this FAQ for details), some NAS units use different assignments. For example, some devices have the power and GND or rpm and PWM pins swapped. Therefore please carefully verify that your NAS device uses the same pin assignment as standard fans. Experienced users may also change the pin assignment by cutting and resoldering the fan cables, but please note that this will void your Noctua manufacturer’s warranty.
  • Different pin functions: Noctua fans use the standardised pin functions for PC fans (see this FAQ for details); however, some NAS units use fans where certain pins serve a different function. For example, some devices use the RPM pin for “power good” signals. Therefore please carefully verify that your NAS device uses the same pin functions.
  • Firmware speed control: Some NAS devices demand a certain maximum or minimum fan speed. If the new fan doesn’t have the same or similar maximum or minimum speed, the device may display errors or even shut down.
  • Different starting voltage: Most NAS devices use voltage-based speed control. If the new fan has a higher starting voltage than the original fan, it may not start up right away. This may lead the NAS device to display errors or even shut down because it suspects a fan failure.
  • Different power draw: Some NAS devices monitor the fan’s power draw. If the new fan has a lower power consumption than the stock fan, the device might display errors or even shut down.

Please note that most NAS manufacturers don’t provide detailed documentation regarding fan compatibility and control, so users who want to replace the fans of their devices usually have to rely on “How to” guides, blog and forum posts or video tutorials. For example, there are excellent video tutorials available for changing the fans in popular Synology NAS models (DS416j, DS1515+ and DS1812+ in English, DS416/DS415/DS916/DS216/DS214 and DS1515+ in German). Please also note that fan compatibility and control can vary from model to model and even from revision to revision even if the devices stem from the same manufacturer. As a result, it is important to make sure that the information or guidelines you rely on when replacing your NAS fan are applicable to your specific model as well as your specific hardware and firmware revision.

Due to the possible issues listed above, Noctua recommends that only experienced users attempt to replace their NAS fans. Please note that since there are so many different NAS models and most of them lack documentation for aspects such as fan compatibility and control, Noctua customer support cannot assist you with compatibility issues when replacing NAS fans. Please contact your NAS manufacturer for any questions regarding aspects such as the device’s pin alignment or fan monitoring and control.

Which Noctua fan or CPU cooler should I buy? How to choose the right model?

Not sure which Noctua product to buy? Our detailed buying guides for fans and CPU coolers help you to choose the model that works best for you.

How should I clean my Noctua fan?

Fans inside computer cases tend to accumulate dust over longer periods of usage. In order to maintain maximum performance, please clean your fans regularly using a duster, slightly moist tissue or canned air. Please be careful not to use too much force in order to prevent any damage to the fan. Please do not use a vacuum cleaner as this may apply excessive force to the fan and do not put the fan under running water as water residues inside the motor may lead to short circuits.
In order to ensure flawless operation over many years of usage, Noctua’s premium grade SSO bearings are fully sealed to prevent the entering of fine dust particles. Please note that the fan is not designed to be taken apart by the user. Removing the impeller from the frame will break the sealing of the bearing and results in a loss of warranty.

Can I disassemble my fan for cleaning (or other purposes, e.g. painting)?

In order to ensure flawless operation over many years of usage, all Noctua fans come with a premium grade SSO bearing, which is fully sealed to prevent the entering of fine dust particles. Please note that the fan is not designed to be taken apart by the user. Removing the impeller from the frame will break the sealing of the bearing and results in a loss of warranty.

It is thus recommended to clean your fans using a duster, slightly moist tissue or canned air. Please be careful not to use too much force in order to prevent any damage to the fan. Please don’t use a vacuum cleaner as this may apply excessive force to the fan.

How big is the NH-D15S and how much clearance does it provide for RAM and mainboard heatsinks? Copy

Yes, Low-Noise Adaptors (L.N.A.s) can be used with y-cables, but please make sure to use one L.N.A. per fan and to place the L.N.A.s between the y-cable and the fans as shown below. Never use one L.N.A. for two (or more fans) by placing it between the mainboard and the y-cable!

D15S

How can I find out the direction of airflow and sense of rotation?

When looking at the fan so that the circular sticker with the Noctua logo is facing you, the direction of airflow is towards you and the sense of rotation is clockwise:

P14

The supplied y-cable is missing a wire at one of the two connectors, is it faulty?

No. As mainboards can process only one rpm-signal per fan header, it would cause problems if the cable transmitted rpm-signals of both fans. For this reason, one of the two connectors does not have an rpm wire and only the fan on the other connector will transmit an rpm signal. Automatic speed control of both fans will work independently from the second fan’s rpm signal.

Can I paint my Noctua fan in order to change its color?

Since even small variations in the layer of paint can lead to an imbalance of the impeller, resulting in vibrations, higher noise levels, increased stress on the bearing and thus reduced lifespan, we do not recommend painting the fan. Please note that for the reasons stated above, painting the fan will void your warranty.

I get a CPU fan error despite the fan is running!

Some mainboards display a CPU fan error when the fan speed falls below a certain threshold, e.g. 900rpm. If you want to run the fan below this speed (e.g. using the supplied U.L.N.A.), please adjust the threshold in the BIOS or disable CPU fan error warning.

Can Noctua fans be used to replace noisy stock fans in switches, routers or other network devices?

Noctua fans such as the 40, 60, 80 or 92mm NF-A series models are ideal for replacing noisy stock fans in switches, routers and other network devices in order to make them quieter and thousands of users have managed to significantly reduce the noise levels of their units this way. However, while it is easy and straightforward to replace the fans in some cases, it can be very difficult in others, so Noctua strongly recommends that users carefully research if it is possible to easily replace the fan(s) of their network device before purchasing a Noctua fan for this purpose. Some of the common issues that can occur when replacing pre-installed fans are:

  • Different pin assignment: Whereas Noctua fans use the standardised pin assignment for PC fans (see this FAQ for details), some network devices use different assignments. For example, some devices have the power and GND or rpm and PWM pins swapped. Therefore please carefully verify that your device uses the same pin assignment as standard fans. Experienced users may also change the pin assignment by cutting and resoldering the fan cables, but please note that this will void your Noctua manufacturer’s warranty.
  • Different pin functions: Noctua fans use the standardised pin functions for PC fans (see this FAQ for details); however, some network devices use fans where certain pins serve a different function. For example, some devices use the RPM pin for “power good” signals. Therefore please carefully verify that your device uses the same pin functions.
  • Firmware speed control: Some network devices demand a certain maximum or minimum fan speed. If the new fan doesn’t have the same or similar maximum or minimum speed, the device may display errors or even shut down.
  • Different starting voltage: Most network devices use voltage-based speed control. If the new fan has a higher starting voltage than the original fan, it may not start up right away. This may lead the device to display errors or even shut down because it suspects a fan failure.
  • Different power draw: Some network devices monitor the fan’s power draw. If the new fan has a lower power consumption than the stock fan, the device might display errors or even shut down.

Please note that most network device manufacturers don’t provide detailed documentation regarding fan compatibility and control, so users who want to replace the fans of their devices usually have to rely on “How to” guides, blog and forum posts or video tutorials. Please also note that fan compatibility and control can vary from model to model and even from revision to revision even if the devices stem from the same manufacturer. As a result, it is important to make sure that the information or guidelines you rely on when replacing your fans are applicable to your specific model as well as your specific hardware and firmware revision.

Due to the possible issues listed above, Noctua recommends that only experienced users attempt to replace their pre-installed fans in network devices. Please note that since there are so many different devices and most of them lack documentation for aspects such as fan compatibility and control, Noctua customer support cannot assist you with compatibility issues when replacing pre-installed fans. Please contact your network device manufacturer for any questions regarding aspects such as the device’s pin alignment or fan monitoring and control.

¿Tiene alguna pregunta sobre uno de nuestros productos? ¡Por favor use este formulario para enviar una pregunta!