heading

The NA-SYC1 is a fan accessory set consisting of two fully sleeved NA-YC1 Y-Cables for 4-pin PWM fans. The NA-YC1 Y-Cables make it possible to run two 4-pin PWM fans on a single fan header and to let the mainboard control the speed of both fans simultaneously. Multiple NA-YC1 can be daisy-chained to control more than two PWM fans via one header.
Caution: Common mainboard fan headers support up to 9.6 or 12W (check your mainboard manual for detailed information). Please thus make sure that the combined power draw of the fans connected to one fan header using NA-YC1 adaptors does not exceed this value!
NA-SYC1
General
Notes and warnings
Caution: Common mainboard fan headers support up to 9.6 or 12W (check your mainboard manual for detailed information). Please thus make sure that the combined power draw of the fans connected to one fan header using NA-YC1 adaptors does not exceed this value! note_warnings
Specification
Connector
4-Pin
Scope of Delivery
  • 2x NA-YC1 Y-Cables
Warranty
6 years
NA-SYC1

Information Sheet (PDF)

Can I use Low-Noise Adaptors with y-cables / multiple fans?

Yes, Low-Noise Adaptors (L.N.A.s) can be used with y-cables, but please make sure to use one L.N.A. per fan and to place the L.N.A.s between the y-cable and the fans as shown below. Never use one L.N.A. for two (or more fans) by placing it between the mainboard and the y-cable!

D15S

Do you have a question concerning one of our products? Please use this form to pose a question!