heading

Tras haber sido galardonado con más de 200 premios y recomendaciones de sitios web y revistas internacionales especializadas, el innovador modelo NH-D15 de Noctua se ha convertido en una referencia dentro de los disipadores de doble torre más exclusivos. La versión SE-AM4 es una edición especial diseñada especialmente para la plataforma AM4 de AMD, que incluye el más novedoso sistema de montaje SecuFirm2™ para AM4 (Ryzen). Equipado también con dos ventiladores silenciososNF-A15 PWM, de 140 mm, el componente térmico NT-H1 de eficacia probada de Noctua y una garantía de fabricación de 6 años, el NH-D15 SE-AM4 forma una solución completa de máxima calidad que representa una opción de lujo tanto para los overclockers como los partidarios del silencio que aspiran a mejorar sus sistemas AM4 lo máximo posible.
Tenga en cuenta que, al ser una edición especial diseñada para AM4, el NH-D15 SE-AM4 incluye únicamente hardware de montaje AM4 y, para este disipador, Noctua no puede proporcionar kits de montaje gratuitos para otros sockets como LGA115x o LGA2011. Para el NH-D15 SE-AM4, estos kits de montaje solo pueden adquirirse en puntos de venta especializados o tiendas online (el modelo NM-i115x para LGA115x y el NM-I2011 para LGA2011). En el futuro, cuando sea técnicamente posible, queremos seguir proporcionando actualizaciones para montaje gratuitas.
Detalles
El galardonado disipador NH-D15

El galardonado disipador NH-D15

Miles de usuarios y aficionados de todo el mundo apuestan plenamente por la calidad y rendimiento del NH-D15. Recomendado por más de 200 sitios web y revistas internacionales especializadas, ya es conocido como uno de los mejores y más exclusivos disipadores del mercado.
Edición especial diseñada específicamente para AM4

Edición especial diseñada específicamente para AM4

El NH-D15 SE-AM4 incluye la característica de refrigeración silenciosa del NH-D15 a la nueva plataforma AM4 de AMD. Gracias a su mayor capacidad en cargas de calor extremo, permite a los overclockers superar el límite de los sistemas AM4 y a los partidarios del funcionamiento silencioso, trabajar con ventiladores a velocidades muy bajas.
Diseño de doble torre con 6 heatpipes

Diseño de doble torre con 6 heatpipes

Al compararlo con los disipadores convencionales de una sola torre, el preciso diseño de doble torre con 6 heatpipes del NH-D15 proporciona una mayor superficie, una mejor distribución y una eficiencia de flujo de aire superior, gracias al doble ventilador.
Conjunto de aletas más anchas y disposición más separada de los heatpipes

Conjunto de aletas más anchas y disposición más separada de los heatpipes

Comparado con el NH-D14, el conjunto de aletas del NH-D15 ha pasado de tener 140 mm a 150 mm y sus heatpipes están ahora más separados, lo que permite una distribución del calor más uniforme sobre un área de superficie mayor y, por lo tanto, contribuye a una mayor eficiencia del NH-D15.
Alta compatibilidad de RAM en modelos de un solo ventilador

Alta compatibilidad de RAM en modelos de un solo ventilador

Gracias a sus aletas más bajas, el NH-D15 proporciona un hueco de 64 mm para los disipadores de memoria más grandes en modelos de un solo ventilador, lo que hace que sea compatible con la mayoría de módulos RAM del mercado. En modelos de doble ventilador, el NH-D15 debería usarse con módulos RAM que tengan una medida estándar (de hasta 32 mm)*.
Doble ventilador NF-A15 de 140 mm

Doble ventilador NF-A15 de 140 mm

El NH-D15 cuenta con dos ventiladores NF-A15 de 140 mm de gran calidad. Al cumplir con los estándares AAO (Optimización Acústica Avanzada) de Noctua y gracias al sofisticado diseño aerodinámico que mide los Canales de Aceleración de Flujo, el NF-A15 se ha labrado una reputación como uno de los mejores ventiladores de 140 mm del mercado.
Soporte PWM y Adaptador para la reducción de ruido

Soporte PWM y Adaptador para la reducción de ruido

Los ventiladores NF-A15 del NH-D15 incluyen el soporte PWM para un conveniente control automático de la velocidad a través de la placa base, Además, la velocidad máxima del ventilador puede reducirse de 1500 a 1200 rpm, de modo que se puede obtener un funcionamiento más silencioso al utilizar el Adaptador para la reducción de ruido.
Excelente refrigeración de los componentes

Excelente refrigeración de los componentes

Situado en la parte inferior del conjunto de aletas, los grandes ventiladores NF-A15 no sólo contribuyen a incrementar las grandiosas capacidades de refrigeración de la CPU del NH-D15, sino que también brindan un considerable flujo de aire a los componentes que rodean a la placa base y disipadores, asegurando así un excelente rendimiento de refrigeración de los componentes.
Sistema de montaje SecuFirm2™ para AM4

Sistema de montaje SecuFirm2™ para AM4

El sistema de montaje SecuFirm2™ de Noctua se ha convertido en sinónimo de calidad, seguridad y facilidad de uso. Para conseguir la máxima compatibilidad y para ajustar la dirección del flujo de aire en el interior de la caja, el sistema de montaje SecuFirm2™ para AM4 facilita la colocación del disipador tanto en la posición convencional como girada 90°.**
Compuesto térmico NT-H1

Compuesto térmico NT-H1

El aclamado NT-H1 de Noctua es una solución térmica de gama alta de probada calidad que proporciona una resistencia térmica mínima, gran facilidad de uso y una destacable fiabilidad, lo que lo hace adecuado para su uso en entornos de estaciones de trabajo y servidores profesionales.
6 años de garantía

6 años de garantía

Los productos de Noctua son conocidos por su impecable calidad y destacada longevidad. Al igual que todos los demás ventiladores de Noctua, los modelos NF-A15 ofrecen un tiempo medio de vida entre fallos (MTBF) de más de 150 000 horas y el paquete NH-D15 completo viene con una garantía total del fabricante de 6 años.
*En chasis con un hueco para el disipador de CPU de más de 160 mm, el ventilador delantero puede moverse hacia arriba para dejar hueco a los módulos de memoria que tengan más de 32 mm.

**La posibilidad de colocar el disipador con un giro de 90° depende del espacio libre alrededor del socket del CPU y puede variar de una placa base a otra.
NH-D15 SE-AM4
General
Notes and warnings
Tenga en cuenta que, al ser una edición especial diseñada para AM4, el NH-D15 SE-AM4 incluye únicamente hardware de montaje AM4 y, para este disipador, Noctua no puede proporcionar kits de montaje gratuitos para otros sockets como LGA115x o LGA2011. Para el NH-D15 SE-AM4, estos kits de montaje solo pueden adquirirse en puntos de venta especializados o tiendas online (el modelo NM-i115x para LGA115x y el NM-I2011 para LGA2011). En el futuro, cuando sea técnicamente posible, queremos seguir proporcionando actualizaciones para montaje gratuitas. note_warnings
Especificaciones disipador
Altura (sin ventilador)
160 mm
Anchura (sin ventilador)
150 mm
Profundidad (sin ventilador)
135 mm
Altura (con ventilador)
165 mm
Anchura (con ventilador)
150 mm
Profundidad (con ventilador)
161 mm
Peso (sin ventilador)
980 g
Peso (con ventilador/es)
1320 g
Material
Cobre (base y heat-pipes), aluminio (aletas de refrigeración), uniones soldadas, niquelado
Tamaño del ventilador
140x150x25 (con agujeros de montaje 120mm), 140x140x25 (con agujeros de montaje 120mm), 120x120x25
Volumen de entrega
  • 2x ventilador de primera calidad NF-A15 PWM
  • 2x adaptador para reducción del ruido (L.N.A.)
  • Cable con forma de Y de 4 pines
  • Compuesto térmico NT-H1
  • Sistema de montaje SecuFirm2™ AM4
  • Noctua Case-Badge en metal
Garantía
6 años
Especificaciones ventilador
Modelo
2x Noctua NF-A15 PWM
Rodamiento
Velocidad de rotación max. (+/-10%)
1500 RPM
Velocidad de rotación con L.N.A. max. (+/-10%)
1200 RPM
Velocidad de rotación min. (PWM, +/-20%)
300 RPM
Sonoridad max.
24,6 dB(A)
Sonoridad con L.N.A. max.
19,2 dB(A)
Potencia
1,56 W
Voltaje
12 V
MTTF
> 150.000 h
NH-D15 SE-AM4
31.03.2017 // FunkyKit.com
test.gif

NH-D15 SE-AM4 Opinión

Besides top performance it offers also silent work and full compatibility with all available devices. Additionally it’s covered by six year warranty. You are receiving the best product for your needs. The only issue for some users can be size of the heatsink. For those users I recommend to take a look at other Noctua AM4 coolers which are also the best in their class. Noctua NH-D15 easily receives FunkyKit’s Editor’s Choice Award!
Resultado del análisis: "Noctua NH-D15 SE-AM4 is the best air cooling solution for AM4 socket available on the market. Period." (Bartosz Waluk, FunkyKit.com)
28.03.2017 // ProfesionalReview.com
test.gif

NH-D15 SE-AM4 Opinión

El nuevo Noctua NH-D15 SE-AM4 se trata de un disipador de torre doble de aluminio, fabricado con los mejores componentes del mercado. Su conjunto con los ventiladores NF-A15 de 140 mm PWM son la combinación ideal en sonoridad y rendimiento del mercado. Su base de cobre niquelada y sus 6 gruesos heatpipes permiten que el AMD Ryzen 1800X mantenga unas temperaturas de 30 ºC en reposo y 48 ºC a máximo rendimiento. Mientras cuando aplicamos overclock 4 GHz y un voltaje de 1.41 suban las temperaturas hasta los 37ºC en reposo y paralice hasta los 56ºC a full. Mención especial a su fácil e intuitivo montaje. Los nuevos brackets son los mejores que he probado actualmente para el socket AM4. Por ahora, es mi elección favorita para esos usuarios que no quieren una refrigeración líquida pero quiere sacar el máximo rendimiento a su procesador de gama alta. También nos ha gustado que permita instalar memoria de alto perfil.
Resultado del análisis: "El equipo de Profesional Review le otorgamos la medalla de platino y la insignia de producto recomendado." (Miguel Ángel Navas Carrera, ProfesionalReview.com)
20.03.2017 // Crazypc.ro
test.gif

NH-D15 SE-AM4 Opinión

Atingând un maxim de aproximativ 63 de grade AMD 1700 nu este un procesor chiar așa fierbinte cum este catalogat în mediul online. Dacă doriți temperauri cât mai mici trebuie să vă orientați către flagshipurile pe aer sau pe cele aio. Recomand Noctua D15 tuturor care doresc un cooler premium silențios și foarte performant. Ventilatoarele marca Noctua și-au făcut treaba cu brio fiind pe toată durata testelor foarte silențioase.
Resultado del análisis: "Analizând arhitectura procesorului Ryzen cât și rezultatele obținute nu pot decât să afirm că Noctua D15 este unul dintre cele mai bune coolere pe aer." (Vlad Buluta, Crazypc.ro)
17.03.2017 // XtremeSystems.org
test.gif

NH-D15 SE-AM4 Opinión

This next set of numbers has me completely stunned, I had to re-test a couple of extra times just to make sure it wasn't an external factor screwing up my numbers, but what you're seeing is real, the Noctua NH-D15 SE-AM4 is the coolest air cooling CPU by a huge margin. It is even cooler than the Cooler Master MasterLiquid 240 and Be Quiet Silent Loop 240mm, all of which are high-performance water cooling units!
Resultado del análisis: "The Noctua NH-D15 SE-AM4 is the new Gold Standard of air-cooling on AM4." (Ambrosidou Nat, XtremeSystems.org)

Manual de instalación (PDF)

Hoja de datos (PDF)

Preguntas frecuentes

How can I check whether my case is wide/high enough for the cooler?

The supplied y-cable is missing a wire at one of the two connectors, is it faulty?

How to remove the base protection cover?

I get a CPU fan error using my Noctua PWM fan, is it faulty?

How should I clean my Noctua cooler?

Why is the cooler’s contact surface slightly convex?

Can I install a 140mm fan with a square frame (e.g. NF-A14)?

I’ve used all the NT-H1 thermal compound that came with the cooler, can you send me more?

Which sockets are supported or can be supported using upgrade kits?

How big is the NH-D15 and how much clearance does it provide for RAM and chipset coolers?

Can I install a third fan on the NH-D15?

What Thermal Design Power (TDP) is this cooler recommended for and how much Watt (W) of heat can it dissipate?

Can I install a Noctua cooler in my system from Acer, Dell, HP or Lenovo?

I'm experiencing fan speed issues with my motherboard from Supermicro, what can I do?

My case supports CPU coolers of up to XXXmm height, which model should I choose?

¿Por qué la base de los disipadores Noctua no tiene un acabado pulido como un espejo?

I have difficulties installing the cooler, can you help?

Should I take the cooler off before transporting my system?

How much torque should be applied when tightening the screws of a Noctua CPU cooler?

Which Noctua CPU coolers are compatible with AMD AM4 (Ryzen)?

How can I determine if the motherboard’s UEFI BIOS is overclocking my processor by default and deactivate this automatic overclocking?

How big is the NH-D15S and how much clearance does it provide for RAM and mainboard heatsinks? Copy

How can I check whether my case is wide/high enough for the cooler?

Most case manufacturers provide specifications for maximum CPU cooler height/clearance. Please refer to these specifications in order to verify that the cooler will fit the case. If no specifications are available, please contact the case manufactuer or measure the distance from the motherboard tray to the side panel (tower cases) or top panel (desktop cases). If this distance is bigger than the height of the cooler + 15mm (mainboard spacers + mainboard + CPU), the height/width of your case should be sufficient.

The supplied y-cable is missing a wire at one of the two connectors, is it faulty?

No. As mainboards can process only one rpm-signal per fan header, it would cause problems if the cable transmitted rpm-signals of both fans. For this reason, one of the two connectors does not have an rpm wire and only the fan on the other connector will transmit an rpm signal. Automatic speed control of both fans will work independent from the second fan’s rpm signal.

How to remove the base protection cover?

Noctua CPU coolers are shipped with a plastic protection cover at the bottom side of the cooler, which protects the contact surface against scratches and other damage.

The base of Noctua CPU coolers is made from hard-wearing nickel plated copper, so there's nothing to worry about if you buy a Noctua cooler from second hand or if your cooler didn't come with a protection cover. Please proceed with the installation as explained in the manual.

You can simply remove the cover as shown below:

Base Protection Cover

I get a CPU fan error using my Noctua PWM fan, is it faulty?

Noctua PWM fans feature a minimum speed of 300rpm to allow for ultra quiet operation when your CPU is at idle state and doesn’t require higher cooling performance. Some mainboards display error messages such as “CPU fan error” during the booting process when the fan speed is below a certain level. If you get such error messages using your Noctua PWM fan and if such options are available in your BIOS, please either adjust the minimum fan speed monitoring limit to 200rpm or increase the minimum PWM duty cycle. If your BIOS doesn’t offer these options, please disable CPU fan errors. For detailed information on BIOS fan settings, please consult your mainoard’s manual or contact your mainboard manufacturer.

How should I clean my Noctua cooler?

Dust: Fans and heatsinks inside computer cases tend to accumulate dust over longer periods of usage. In order to maintain maximum performance, please clean your fan and heatsink regularly. For cleaning, please first remove the fan from the heatsink and clean it using a duster, slightly moist tissue or canned air. Please be careful not to use too much force in order to prevent any damage to the fan. Please do not use a vacuum cleaner as this may apply excessive force to the fan and do not put the fan under running water as water residues inside the motor may lead to short circuits. Please also note that the fan is not designed to be taken apart by the user. Removing the impeller from the frame will break the sealing of the bearing and results in a loss of warranty. Before reinstalling the fan, clean the heatsink itself with a duster or vacuum cleaner. Do not use water to clean the cooler. Finally put the fan back on and connect it to your motherboard fan header or fan controller.
Thermal paste residues: Whenever you take off the heatsink from the CPU, we recommend to clean the CPU as well as the base of the cooler before re-applying thermal paste and re-installing the cooler. You can either just wipe the base and the CPU clean with a dry, lint-free tissue or, for more thorough cleaning, use a lint-free tissue moistened with either a mild solution of washing-up liquid or isopropyl alcohol. Do not put the cooler or CPU under running water. Note that both the base of the heatsink and the CPU should be dry, free from residues of thermal compound and free from grease before re-applying thermal paste and re-installing the cooler.

Why is the cooler’s contact surface slightly convex?

As the Integrated Heat Spreaders (IHS) of today’s CPUs are slightly concave, the cooler’s contact surface has been deliberately designed to be slightly convex in order to ensure optimal contact. This way, more contact pressure will be applied at the centre of the IHS directly above the DIE, which results in better heat transfer and improved overall performance.

Can I install a 140mm fan with a square frame (e.g. NF-A14)?

Yes, fan clips for installing square frame 140mm fans (such as the NF-A14) are available on request via our customer support.

I’ve used all the NT-H1 thermal compound that came with the cooler, can you send me more?

Please kindly note that the NT-H1 thermal compound supplied with our coolers is a consumable item so our manufacturer’s warranty does not include providing additional thermal compound. You can purchase NT-H1 from our resellers.

Which sockets are supported or can be supported using upgrade kits?

Please refer to our socket compatibility chart.

How big is the NH-D15 and how much clearance does it provide for RAM and chipset coolers?

Please refer to the following drawing for the exact measurements and clearance for RAM and chipset coolers:

D15

The front fins of the NH-D15 generally protrude over the RAM slots. Due to the recessed lower fins, it is still possible to use RAM modules with up to 64mm height in single fan mode. In dual fan mode, the front fan will sit above the RAM slots as well. In this case, Noctua recommends using standard height RAM (up to 32mm). However, in chassis with more than 165mm CPU cooler clearance, the front fan can be moved upwards to make room for memory modules taller than 32mm (e.g. moving the fan 5mm up will increase the total height from 165 to 170mm and make room for 37mm tall modules).

Can I install a third fan on the NH-D15?

Adding a third fan to the NH-D15 only yields minimal improvements in cooling performance (0.5°C max.), but noise levels will increase significantly. As this doesn’t make sense from a technical point of view, we don’t include mounting hardware for a third fan in the box and don’t offer it separately.

What Thermal Design Power (TDP) is this cooler recommended for and how much Watt (W) of heat can it dissipate?

Please refer to our TDP guide for information on maximum recommended TDP and heat dissipation.

Can I install a Noctua cooler in my system from Acer, Dell, HP or Lenovo?

Systems from Acer, Apple, Dell, HP, Lenovo or other major brands often use motherboards which differ slightly from the specifications issued by Intel and AMD. While those changes are usually subtle, they can lead to compatibility issues with coolers that where built to comply with these specifications.

Even in case the cooler is mechanically compatible and can be installed, other issues can occur, e.g. proprietary fan connectors, BIOS errors due to a low fan speed, shutdowns, etc. Some of these problems can be avoided with some technical knowledge, but especially BIOS related issues can often not be resolved.

Due to the large number of possible issues that cannot be resolved with different mounting parts alone, Noctua does not officially support systems from Acer, Apple, Dell, HP, Lenovo or other major brands.

I'm experiencing fan speed issues with my motherboard from Supermicro, what can I do?

The BIOS of many motherboard models from Supermicro expects a certain minimum fan speed (usually 700rpm), which is higher than the minimum fan speed that can be achieved with Noctua's PWM fan models. The BIOS may interpret the low minimum RPM of Noctua fans as a fan error and thus try to run the fan at 100% for a short period before going back to automatic control.. This can result in oscillating fan speeds and fan speed warnings in the BIOS or the fan management console.

Unfortunately there is usually no option to set a lower minimum value that would suit the low minimum speed of Noctua PWM fans.The issue can thus only be resolved by either disabling automatic fan speed control in BIOS, which will cause the fans to run at a constant speed, or by requesting a modified BIOS file from Supermicro, which takes the minimum fan speed of Noctua fans into account (charges might apply).

My case supports CPU coolers of up to XXXmm height, which model should I choose?

Please refer to our TDP guide in order to select the cooler that offers the best cooling performance at a given height.

¿Por qué la base de los disipadores Noctua no tiene un acabado pulido como un espejo?

Teniendo en cuenta que mayoría de los entusiastas del hardware usan compuestos térmicos de alta viscosidad, la superficie de la base de los disipadores Noctua se ha optimizado para el uso de este tipo de pastas térmicas. Las micro-hendiduras de la superficie de la base de los disipadores Noctua aseguran que los compuestos térmicos de alta viscosidad se dispersen de manera uniforme en una fina capa por toda la zona de contacto y que no queden huecos entre el disipador y la CPU. Con un acabado pulido como un espejo, el riesgo de una dispersión desigual es mucho más alto. Dado que las capas demasiado gruesas de pasta térmica y los huecos con aire deterioran dramáticamente la transferencia térmica, las micro-hendiduras son de vital importancia en el rendimiento general de los disipadores Noctua cuando se usan con compuestos térmicos de alta viscosidad.

I have difficulties installing the cooler, can you help?

Please refer to the installation manual and our video installation guides for detailed instructions on how to install the cooler.

Should I take the cooler off before transporting my system?

As it is not possible to reliably calculate or control the forces that act upon a system during transport (e.g. in shipping), we generally recommend, for safety reasons, taking the cooler off. Noctua cannot be held responsible for any damage that may arise due to excessive stress during transport if you keep the heatsink installed.

How much torque should be applied when tightening the screws of a Noctua CPU cooler?

All screws should be tightened gently until they stop without using excessive force. Please do not exceed the following values for maximum tightening torque:
Screw typeMax. torque
NM-SSC1 screws for fixing the fastening brackets to the base of the heatsink0.5 Nm
NM-ITS1 thumb screws for fixing Intel mounting bars0.5 Nm
NM-ALS1 screws for fixing AMD mounting bars0.6 Nm
Spring-loaded screws for fixing the heatsink to the mounting bars0.6 Nm

Which Noctua CPU coolers are compatible with AMD AM4 (Ryzen)?

The following models include a mounting-kit for socket AM4 and are thus compatible out of the box:

NH-D15 SE-AM4
NH-U12S SE-AM4
NH-L9x65 SE-AM4

The following models can be made compatible with the AM4 socket free of charge using the NM-AM4 upgrade-kit:

NH-C12P
NH-C12P SE14
NH-C14
NH-C14S
NH-D14
NH-D14 SE2011
NH-D15
NH-D15S
NH-D9L
NH-L12
NH-L9x65
NH-U12
NH-U12F
NH-U12P
NH-U12P SE1366
NH-U12P SE2
NH-U9
NH-U9B
NH-U9B SE2
NH-U9F

The following models can be made compatible with the AM4 socket free of charge using the NM-AM4-UxS upgrade-kit:

NH-U14S
NH-U12S
NH-U9S

The following models can be made compatible with the AM4 socket using the NM-AM4 upgrade-kit but are not eligible for Noctua‘s free mounting offer, so users have to purchase the kit at local resellers:

NH-U12DO (Note that the A3 version is not compatible!)
NH-U12DX
NH-U12DX 1366
NH-U12DX i4
NH-U9DX i4
NH-U9DX 1366
NH-U9DO (Note that the A3 version is not compatible!)

The following models are not compatible with the AM4 socket and can not be upgraded:

NH-L9i
NH-U12DO A3
NH-U9 DO A3

We also aim to provide an upgrade-kit for NH-L9a, but due to some late changes to the AM4 platform, it is not yet clear whether installation will be possible. We are currently exploring the available options and will provide more information at a later date.

How can I determine if the motherboard’s UEFI BIOS is overclocking my processor by default and deactivate this automatic overclocking?

Most motherboard vendors allow their overclocking-enabled products (e.g. those with Intels X- or Z-series chipsets) to run the processor at increased clock speeds by default, without requiring any user action at all. Since TDP (Thermal Design Power) limits are usually also disabled by default, this leads to the CPU exceeding the rated TDP to a varying degree, depending on the used applications and their workloads. Due to the increased heat output of the CPU, you may see higher CPU temperatures than expected.

In order to find out if your motherboard is overclocking your processor by default, please enter the UEFI BIOS and select the “advanced” or “overclocking” menu. There you should be able to find options such as “MultiCore Enhancement” (options: enabled/disabled), “CPU Ratio Apply Mode” (options: all/per core) or similar. To disable the automatic overclocking, adjust the settings either to “disabled” or “per core” and make sure that the individual multipliers match the original specifications.

In doubt, please contact your motherboard vendor for detailed instructions on how to disable this feature.

How big is the NH-D15S and how much clearance does it provide for RAM and mainboard heatsinks? Copy

Yes, Low-Noise Adaptors (L.N.A.s) can be used with y-cables, but please make sure to use one L.N.A. per fan and to place the L.N.A.s between the y-cable and the fans as shown below. Never use one L.N.A. for two (or more fans) by placing it between the mainboard and the y-cable!

D15S

¿Tiene alguna pregunta sobre uno de nuestros productos? ¡Por favor use este formulario para enviar una pregunta!