Noctua Straight-Blade-Design

The Straight-Blade-Design of the NF-S12 series provides the maximum efficiency of a straight fan blade without the drawback of higher noise emission, which arises when straight blades are used at higher rotation speeds. At the low rotation speeds of the NF-S series, the Noctua Straight-Blade-Design achieves a significantly higher flow rate than forward or backward swept blade designs. Furthermore, among other measures to prevent vortices like the rounded rotor hub, the distance between rotor and stator (tip clearance) was increased in order to reduce the problem of tip vortices which plays an important part in the noise emission of axial fans. With its fan blade exactly tailored to ultra low noise application, the NF-S12 series is significantly more quiet than other high end silent fans.

Mag. Manfred Stadler MBA of the Austrian Institute for Heat-Transmission and Fan Technology (Österreichisches Institut für Wärmeübertragung und Ventilatorentechnik, ÖIWV) about the development of the Noctua Straight-Blade and Raised-Blade-Designs:

"In the area of PC cooling, the last years saw a growing demand for axial fans with the lowest possible noise emission, which manufacturers mostly met by simply reducing the RPM of existing models without sufficiently adapting the blade geometry and profile to the modified fluid dynamic parameters. The comparison of measured data and simulation outputs showed that the result was an average deficit of efficiency of 10-15%. The complete redevelopment of the blade geometry and profile was carried out with exact fluid mechanical adjustment to minimal noise emission in a speed range of 400-1800RPM at a height of 25mm and a radius of 40 and 60mm. Both fan blades possess 8-12% more flow rate than comparable products at the same total noise emission and static pressure." (Mag. Manfred Stadler MBA, Austrian Institute for Heat-Transmission and Fan Technology (Österreichisches Institut für Wärmeübertragung und Ventilatorentechnik, ÖIWV)