heading

Específicamente diseñado para aplicaciones que requieren bastante presión, como en la refrigeración de CPU o radiadores, el clásico NF-P12 es el favorito entre los usuarios más entusiastas de todo el mundo y ayuda a que Noctua se establezca como uno de los mejores proveedores de equipamientos de refrigeración silenciosa de calidad. La nueva edición redux actualiza un modelo galardonado de Noctua al presentarlo en un paquete a un precio accesible que se ha reducido a lo esencial: el ventilador NF-P12. Sus rodamientos SSO, sus más de 150.000 horas de tiempo medio de vida entre fallos y sus 6 años de garantía del fabricante hacen del NF-P12 redux la elección perfecta al combinar la calidad que ofrece Noctua con un precio atractivo. La versión ultra lenta de 900 rpm es ideal para las aplicaciones ultra silenciosas y para los usuarios más sensibles al ruido que buscan un funcionamiento extremadamente silencioso.
Detalles
Diseño probado del NF-P12

Diseño probado del NF-P12

Decenas de miles de entusiastas de la refrigeración silenciosa tienen fe ciega en el clásico NF-P12 de Noctua. Gracias a su impresionante silencio, su excelente rendimiento y su calidad impecable, el NF-P12 se ha convertido en una referencia establecida para los ventiladores de 120 mm.
Simplificada edición redux

Simplificada edición redux

La línea de productos redux actualiza algunos de los modelos más populares y galardonados de Noctua al presentarlos en paquetes a precios accesibles. Todos los productos de la edición redux son modelos con una eficacia probada a lo largo del tiempo, lo que hace que Noctua se establezca como uno de los mejores proveedores de equipamientos de refrigeración silenciosa de calidad.
Diseño de nueve aspas de presión optimizada

Diseño de nueve aspas de presión optimizada

Diseñado específicamente para aplicaciones de alta impedancia como disipadores de CPU, radiadores de refrigeración líquida o cajas con estrechas rejillas del ventilador, el rotor de nueve aspas del NF-P12 proporciona una sorprendente eficiencia de presión y de flujo de aire.
Vortex-Control Notches (Muescas de control de vórtice)

Vortex-Control Notches (Muescas de control de vórtice)

Las Vortex-Control Notches (muescas de control de vórtice), seña de identidad de Noctua, dividen los vórtices de los extremos de los ejes y, por tanto, extienden la emisión sonora del ventilador en un rango de frecuencias más amplio. Esta medida hace que el sonido del ventilador sea más agradable para el oído humano.
Smooth Commutation Drive (Unidad de Conmutación Suave) 2

Smooth Commutation Drive (Unidad de Conmutación Suave) 2

La última versión del avanzado sistema SCD (Unidad de Conmutación Suave) de Noctua asegura una mayor estabilidad en el funcionamiento eliminando las variaciones de torsión y los ruidos de intercambio. Esto hace que el ventilador sea notablemente silencioso, incluso a una corta distancia.
Rodamientos SSO-Bearing

Rodamientos SSO-Bearing

La combinación del eficaz concepto de rodamientos hidrodinámicos con un imán adicional que apoya la autoestabilización del eje del rotor convierte a la tecnología SSO-Bearing de Noctua, de probada eficacia, en sinónimo de una operación sumamente silenciosa y una excepcional estabilidad a largo plazo.
Accesorios opcionales

Accesorios opcionales

Los usuarios pueden elegir entre la amplia gama de accesorios opcionales de Noctua, como los soportes anti-vibración, los adaptadores para la reducción de ruido, los cables con forma de Y, los adaptadores de 3:4 pines o los cables de extensión, para actualizar los ventiladores de la edición redux de acuerdo con sus necesidades individuales.
Personalizable en color gracias a los paneles anti-vibración NA-SAVP1

Personalizable en color gracias a los paneles anti-vibración NA-SAVP1

El marco del ventilador puede combinarse con los paneles anti-vibración NA-SAVP1 de la línea chromax de Noctua. Disponibles en negro, rojo, azul, blanco, verde y amarillo, estos paneles no solo amortiguan cualquier vibración, sino que también permiten que el ventilador conjunte en colores con los patrones más populares.
6 años de garantía del fabricante

6 años de garantía del fabricante

Los ventiladores de Noctua son conocidos por su impecable calidad y su larga vida útil. Como todos los ventiladores de Noctua, los modelos de la edición redux disponen de un tiempo medio de vida entre fallos de más de 150.000 horas y de una garantía total del fabricante de 6 años.
NF-P12 redux-900
Especificaciones ventilador
Dimensiones
120x120x25 mm
Espacio entre orificios de montaje
105x105 mm
Longitud del cable
40cm
Rodamiento
Velocidad de rotación (+/-10%)
900 RPM
Sonoridad
12,6 dB(A)
Presión estático
1,21 mm H₂O
Potencia max.
0,3 W
Amperaje max.
0,025 A
Voltaje
12 V
MTTF
> 150.000 h
Volumen de entrega
  • Tornillos de ventilador
6 años
NF-P12 redux-900
17.02.2019 // techPowerUp.com
test.gif

NF-P12 redux-900 Opinión

  • Good price point, especially for the Noctua brand
  • Zero-RPM mode allows fans to completely switch off in idle conditions based on PWM duty cycle
  • Decent performance/noise balance, especially at higher fan speeds
  • Re-worked PWM motor works well in minimizing any PWM switching noise at low RPM
  • 6-year warranty
  • Resultado del análisis: "The NF-A12x25 we saw before absolutely outperforms it at the same noise levels and will get most of the attention from consumers, but the NF-P12 redux series is a sleeper of sorts, especially at the ~$14 price point. Sure, it has no RGB lighting (nothing from Noctua does) and is really taking the minimalist approach to heart as far as packaging and accessories go, but if you want a well-performing, durable fan backed with 6 years of warranty and customer support, you have a solid option on your hands now." (Varun Shenoy Gangoli, techPowerUp.com)
    19.05.2018 // Vortez.net
    test.gif

    NF-P12 redux-900 Opinión

    Appearance wise, this fan should fit in with more builds than your typical Noctua, but without that same recognisable colour. Build quality is solid, as you’d expect, with the SSO bearing and magnetic stabilisation reducing noise as well as Vortex-Control Notches spreading out the unavoidable wind noise over more frequency ranges, producing a cleaner and more pleasurable sound. Cutting back the NF-P12 to the core, providing only the fan and a basic mounting system, has provided us with the essential performance without the associated cost that comes with it. Noctua have cut back all non-essential parts to reduce cost, without sacrificing on quality or performance. The NF-P12 Redux carries the torch for the ageing NF-P12.
    Resultado del análisis: "The Noctua NF-P12 Redux competes against a lot of budget-priced fans from several different brands, however, in our experience and testing, the NF-P12 Redux performs far better than most fans, and comes with that all-important 6 year warranty." (Matthew Hodgson, Vortez.net)
    05.02.2019 // DDWorld.cz
    test.gif

    NF-P12 redux-900 Opinión

    Začněme nejdříve u ventilátorů NF-P12 REDUX, které NOCTUA nabízí ve verzích s 900 a 1300 otáčkami, nebo 1300 PWM a 1700 PWM. Mají starší konstrukci lopatek i materiálů, ale to neznamená nic špatného. K dispozici jsou v tom pro mnohé atraktivnějším šedo-šedém barevném zpracování a nemají ani žádné extra okázalé balení. Jejich cena je tak i docela přístupných 300 korun vč. DPH. Mají přitom všechny kvality NOCTUA včetně 6let záruky. Proti příbuzné luxusnější hnědo-hnědé variantě F12 či P12 jsou tak znatelně dostupnější, protože jejich ceny se pohybují kolem 430 korun. A pro řadu lidí je to šedé zpracování i pohlednější.
    Resultado del análisis: "Mohu tedy jen a jen doporučit, pokud hledáte špičkový výkon, kvalitu a 6let záruky NOCTUA za rozumnější cenu. Osobně bych volil jako nejatraktivnější tu 1700 PWM edici." (Jan Stach, DDWorld.cz)
    30.01.2019 // GinjFo.com
    test.gif

    NF-P12 redux-900 Opinión

    Noctua propose au travers de ses différents NF-P12 Redux l’un de ses anciens ventilateurs phares. Nous sommes en présence d’une offre simplifiée mettant de côté le bundle pour se concentrer sur l’essentiel. Disponible sous la barre des 20 € avec une garantie de 6 ans, ces ventilateurs s’appuient sur une architecture solide ayant fait ses preuves. Nos mesures montrent que nous avons des prestations de premiers plans capables de dépasser dans certaines circonstances les performances d’un ventilateur de 140 mm. Sur la question des nuisances sonores, le bruit est bien maitrisé en 5, 7 et 9 Volts. Le NF-P12 redux-900 est de loin le plus discret mais il est aussi le moins performant. Quel que soit le modèle, tous trouvent une place dans un boitier. Le NF-P12 redux-1700 vise les débits tandis que la déclinaison redux-1300 joue sur le rapport bruit/débit. Enfin, le NF-P12 redux-900 s’oriente de son côté vers le silence. Pour finir, le NF-P12 redux-1700 peut également prendre place sur un radiateur de Watercooling ou un ventirad tout comme le redux1300. Nous le conseillons cependant uniquement pour un ventirad.
    Resultado del análisis: "Avec cette gramme NF-P12 redux, Noctua propose l’un de ses ventilateurs vedettes au travers d’une offre simplifiée et sans bundle. L’objectif est d’avoir un prix contenu sans faire de concession sur la mécanique et les performances. Le bilan est positif avec des prestations de qualité, un choix pour répondre à différents besoins et une solide garantie de 6 ans." (Jérôme Gianoli, GinjFo.com)
    24.01.2019 // eTeknix.com
    test.gif

    NF-P12 redux-900 Opinión

    I have had these fans in my possession for a little while now and although I really wanted to just dive in, it was clear that to provide any results of use, a lot of thought would be needed in the testing and methodology to specifically provide results that were not only informative, but from which conclusions could clearly be drawn. Despite all the test results though, the conclusion is actually remarkably straightforward. Noctua makes great system fans. As above, the decision of which one/s you should get is ultimately directed by what your requirements are. The ULN models are a little more expensive than their standard models, but you get an excellently quiet performance and still remarkably good results. The better performing fans (in terms of speed) give excellent airflow but obviously run a little louder when put to the test.
    Resultado del análisis: "In conclusion, if you are looking towards some 120mm fans for your system, you can’t go wrong with Noctua. They might not be the best looking, but you will never fail to be impressed with them!" (Mike Sanders, eTeknix.com)
    04.01.2019 // DVTests.com
    test.gif

    NF-P12 redux-900 Opinión

    I believe I’ve spent really a lot of quality time having fun with the latest models added to the Redux series. Models which follow the company standards to feature the wide range of Noctua’s technologies combined together to deliver the best possible airflow level/ static pressure level and noise level balance at affordable package price. NF-P12 redux 900 is the slowest model from the latest arrivals entirely made to be installed as a case fan to boost the overall airflow level inside every modern case. The fan itself is absolutely quiet even at full speed, which makes it a good choice for SFF or HTPC systems. On the other hand, NF-P12 redux 1300 and NF-P12 redux 1300 PWM are the versatile versions designed to work as case fans when set to operate at lower voltage and at the same time are capable to be a main cooling unit for CPU cooler heat sinks or water cooling radiators when cooling processors working at default or a bit overclocked frequencies. The fans are very quiet, when working at low operational voltage and generate a tiny noise coming out of the air passing through the propellers when working at full speed. And last but not least, NF-P12 redux 1700 PWM is definitely the best performer from the latest arrivals. It is a fan which is pretty loud at full speed but definitely capable to deliver enough airflow level and static pressure level to keep every modern processor working stable at default and overclocked frequencies.
    Resultado del análisis: "There is no doubt that all of the NF-P12 redux fans strictly follow the company’s high quality standards featuring a set of pretty sophisticated technologies." (Dobrin Krastev, DVTests.com)
    04.01.2019 // HardwareAsylum.com
    test.gif

    NF-P12 redux-900 Opinión

    The second fan we looked at was the NF-P12 Redux line of fans. These are a lower cost offering to the discontinued NF-P12 designed for radiator cooling. The Redux features the same basic design with a few technologies removed to keep the costs down. I don’t have a previous generation P12 to test against but the fans worked wonderfully and aside from the new color scheme I doubt anyone would notice a difference.
    Resultado del análisis: "[I]f cost is a factor the NF-P12 Redux is an excellent alternative" (Dennis Garcia, HardwareAsylum.com)
    22.10.2018 // TheLab.gr
    test.gif

    NF-P12 redux-900 Opinión

    Η Noctua με την σειρά NF-P12 Redux καθιστά προσιτό σε πολύ ευρύτερο κοινό, έναν εξαιρετικό σε επιδόσεις ανεμιστήρα, που είναι σε θέση να δώσει λύση αποτελεσματική και αθόρυβη σε όποιο πρόβλημα ψύξης έχουμε, είτε αυτό είναι AIO radiator, είτε είναι αερόψυκτρα και δεν θα σας απογοητεύσει ούτε σε ένα "σφιχτό" κουτί.
    Resultado del análisis: "Αν το περιθώριο εξόδων που έχουμε είναι σχετικά μικρό, αλλά δεν θέλουμε να κάνουμε υποχωρήσεις στην ποιοτική και αποτελεσματική λύση στο θέμα ανεμιστήρας, θα κάνουμε χάρη στον εαυτό μας να σταθούμε πολύ προσεκτικά στην σειρά NF-P12 Redux της Noctua, γιατί έχει την απάντηση στο πρόβλημά μας και μάλιστα με τρόπο που θα υπερκαλύψει ό,τι απαιτήσεις έχουμε !" (Stelios Petousakis, TheLab.gr)
    22.06.2018 // EnosTech.com
    test.gif

    NF-P12 redux-900 Opinión

    On stock clocks, under stress test, the NF-P12 1700 PWM was doing 26.67°C delta temps. Both variants of NF-P12 1300 were neck-to-neck with 29°C delta temps. The NF-P12 900 was doing 33.67°C which is on a warmer side particularly on the stock clocks but given its 900 RPM maximum speed and the aim behind it, this level of silent performance is actually good. This is a good performance overall and particularly given the low noise level on these fans, Noctua is once again delivering in the Noise-to-Performance ratio category.
    Resultado del análisis: "The low price tag on these fans makes it ideal for the budget users to have a premium cooling solution from the Noctua without much burden on their wallets. These fans come recommended by us." (Nauman Siddique, EnosTech.com)
    14.06.2018 // modding.fr
    test.gif

    NF-P12 redux-900 Opinión

    Les performances de refroidissement sont à la hauteur de ce que l’on espérait notamment pour la version Redux 1700 qui assure son taf sur toute sa plage de vitesse de rotation. La version 1300 a pour lui son faible niveau sonore et ce même à pleine vitesse où sans être silencieux il reste nettement plus discret que son homologue Redux 1700. De plus avec ce niveau sonore contenu, il se débrouille bien face à notre i7 7700k et nous n’aurons ainsi pas besoin de trop réduire sa vitesse pour ne plus l’entendre. Le ventilateur Redux NF-P12 900 a élu domicile dans le monde du silence !!! Son but n’est pas franchement de s’attaquer à notre processeur mais plutôt à un CPU nettement plus calme en terme d’émission de chaleur comme ceux que l’on peut avoir dans les config bureautique/multimédia. Ainsi il fait son taf dans un silence royale.
    Resultado del análisis: "Comme nous l’avons suggéré en introduction, si décidément vous avez du mal avec les couleurs natives des ventilateurs Noctua, la gamme Redux NF-P12 offre une excellente alternative tant sur le plan des couleurs que de ses performances." (Bertrand Curras, modding.fr)

    Es posible comprar nuestros productos a través de nuestros colaboradores locales de ventas o directamente con nosotros desde nuestras tiendas oficiales de Amazon o eBay:



    En calidad de Afiliado de Amazon, obtenemos ingresos por las compras adscritas que cumplen los requisitos aplicables.

    eBay.com
    eBay.de

    Hoja de datos (PDF)

    Can I disassemble my fan for cleaning (or other purposes, e.g. painting)?

    In order to ensure flawless operation over many years of usage, all Noctua fans come with a premium grade SSO bearing, which is fully sealed to prevent the entering of fine dust particles. Please note that the fan is not designed to be taken apart by the user. Removing the impeller from the frame will break the sealing of the bearing and results in a loss of warranty.

    It is thus recommended to clean your fans using a duster, slightly moist tissue or canned air. Please be careful not to use too much force in order to prevent any damage to the fan. Please don’t use a vacuum cleaner as this may apply excessive force to the fan.

    I'm experiencing fan speed issues with my motherboard from Supermicro, what can I do?

    The BIOS of many motherboard models from Supermicro expects a certain minimum fan speed (usually 600 or 700rpm), which is higher than the minimum fan speed that can be achieved with Noctua's PWM fan models. The BIOS may interpret the low minimum RPM of Noctua fans as a fan error and thus try to run the fan at 100% for a short period before going back to automatic control. This can result in oscillating fan speeds and fan speed warnings in the BIOS or the fan management console.

    Unfortunately there is usually no option to set a lower minimum value in the BIOS that would suit the low minimum speed of Noctua PWM fans. The issue can thus only be resolved by either disabling automatic fan speed control in BIOS, which will cause the fans to run at a constant speed, by using 3rd party tools like IPMItool or IPMIutil, or by requesting a modified BIOS file from Supermicro, which takes the minimum fan speed of Noctua fans into account (charges might apply). Please note that any modifications performed with 3rd party tools are done at your own risk and that Noctua can not be held responsible for any possible issues.

    I get a CPU fan error using my Noctua PWM fan, is it faulty?

    Noctua PWM fans feature a minimum speed of 300rpm to allow for ultra quiet operation when your CPU is at idle state and doesn’t require higher cooling performance. Some mainboards display error messages such as “CPU fan error” during the booting process when the fan speed is below a certain level. If you get such error messages using your Noctua PWM fan and if such options are available in your BIOS, please either adjust the minimum fan speed monitoring limit to 200rpm or increase the minimum PWM duty cycle. If your BIOS doesn’t offer these options, please disable CPU fan errors. For detailed information on BIOS fan settings, please consult your mainoard’s manual or contact your mainboard manufacturer.

    My Noctua PWM fan runs at a much higher minimum speed than advertised, what is wrong?

    The specified minimum speed refers to the speed at 20% PWM duty cycle. There can be several reasons why the fan doesn‘t go as low as indicated:

    1. Many mainboards do not go below 40%, 50% or even 60% PWM duty cycle on case fan headers. Please refer to your mainboard manual to verify whether the fan header actually goes down to 20% duty cycle. If that's not the case, in some cases you can use the fan speed control software supplied with your mainboard to overcome these limitations and reduce the fan speed even further. However, 3rd party tools like SpeedFan offer greater flexibility and better options to work around the limitations imposed by the mainboard vendors.

    2. Some mainboards feature 4-pin fan headers that actually don‘t use a PWM signal on Pin 4 to control the fan speed but rather reduce the voltage on Pin 2 (like a standard 3-pin fan header). As the fan speed at minimum voltage is usually higher than the speed at 20% PWM duty cycle, the fan can not reach as low minimum speeds under voltage control as under PWM control. Please refer to your mainboard manual to check whether or not your mainboard has 4-pin fan headers that control the fan speed by reducing voltage on Pin 2 rather than by changing the PWM duty cycle on Pin 4:

      4 pin fan header types

      Note that mainboard manufacturers use different terms to indicate that Pin 4 is not being used for PWM control (e.g. “+5V”, “VCC” or “NC”), but if one of these terms is used, you can be sure that the fan header does not support PWM. If Pin 4 is described as “Speed Control” or “PWM” or the like, you can be sure that the fan header supports PWM.

      Unfortunately, the description of Pin 2 is not always a clear indication as some manufacturers use terms such as “Fan PWR” or “Power” for both types of fan headers. However, if Pin 2 is described as “Speed Control”, you can also be sure that the fan header does not support PWM based speed control. If Pin 2 is described as “+12V”, this is a clear indication that the fan header supports PWM.

      Please also note that in some cases, the descriptions of the pin layouts in the mainboard manuals may not be correct and some models actually allow you to switch the fan headers from voltage control mode to PWM control mode in the BIOS even though the pin descriptions do not indicate PWM support. We thus recommend to look for these options in the BIOS before taking other measures. In case of doubt, please contact your mainboard manufacturer.


      If your mainboard features other 4-pin fan headers that use PWM for speed control, you can run multiple fans from these headers using Y-split cables. Make sure not to exceed the specified maximum power draw of the fan headers (usually 10-12W) though.

    My Noctua PWM fan starts to spin when the PC boots but then stops, what is wrong?

    Some mainboards feature 4-pin fan headers that actually don‘t use a PWM signal on Pin 4 to control the fan speed but rather reduce the voltage on Pin 2 (like a standard 3-pin fan header). In this case, it may occur that the mainboard reduces the voltage so much that the fan stops. Please refer to your mainboard manual to check whether or not your mainboard has 4-pin fan headers that control the fan speed by reducing voltage on Pin 2 rather than by changing the PWM duty cycle on Pin 4:

    4 pin fan header types

    Note that mainboard manufacturers use different terms to indicate that Pin 4 is not being used for PWM control (e.g. “+5V”, “VCC” or “NC”), but if one of these terms is used, you can be sure that the fan header does not support PWM. If Pin 4 is described as “Speed Control” or “PWM” or the like, you can be sure that the fan header supports PWM.

    Unfortunately, the description of Pin 2 is not always a clear indication as some manufacturers use terms such as “Fan PWR” or “Power” for both types of fan headers. However, if Pin 2 is described as “Speed Control”, you can also be sure that the fan header does not support PWM based speed control. If Pin 2 is described as “+12V”, this is a clear indication that the fan header supports PWM.

    Please also note that in some cases, the descriptions of the pin layouts in the mainboard manuals may not be correct and some models actually allow you to switch the fan headers from voltage control mode to PWM control mode in the BIOS even though the pin descriptions do not indicate PWM support. We thus recommend to look for these options in the BIOS before taking other measures. In case of doubt, please contact your mainboard manufacturer.



    To resolve the issue, you can:

    1. Choose a higher fan speed profile in the BIOS (e.g. „normal“ instead of „silent“, etc.) or deactivate automatic fan speed control and use a Low-Noise Adaptor instead.

    2. Use the mainboard‘s fan speed control software or 3rd party tools like Speedfan to regulate the fan speed. Unlike BIOS based fan speed control, the supplied software usually checks whether the fan has stopped and increases voltage accordingly or at least offer more options to set up the fan properly.

    3. If your mainboard features other 4-pin fan headers that use PWM for speed control, you can run multiple fans from these headers using Y-split cables. Make sure not to exceed the specified maximum power draw of the fan headers (usually 10-12W) though.

    How much torque should be used for fan screws?

    Please use 0.6Nm to tighten fan screws. Make sure not to overtighten the screws as this may damage the fan frame.

    Can Noctua fans be used to replace noisy stock fans in NAS devices?

    Noctua fans such as the 40, 60, 80, 92 or 120mm NF-A series models are ideal for replacing noisy stock fans in NAS devices in order to make them quieter and thousands of users have managed to significantly reduce the noise levels of their NAS units this way. However, while it is easy and straightforward to replace the fans in some cases, it can be very difficult in others, so Noctua strongly recommends that users carefully research if it is possible to easily replace the fan(s) of their NAS device before purchasing a Noctua fan for this purpose. Some of the common issues that can occur when replacing NAS fans are:

    • Different pin assignment: Whereas Noctua fans use the standardised pin assignment for PC fans (see this FAQ for details), some NAS units use different assignments. For example, some devices have the power and GND or rpm and PWM pins swapped. Therefore please carefully verify that your NAS device uses the same pin assignment as standard fans. Experienced users may also change the pin assignment by cutting and resoldering the fan cables, but please note that this will void your Noctua manufacturer’s warranty.
    • Different pin functions: Noctua fans use the standardised pin functions for PC fans (see this FAQ for details); however, some NAS units use fans where certain pins serve a different function. For example, some devices use the RPM pin for “power good” signals. Therefore please carefully verify that your NAS device uses the same pin functions.
    • Firmware speed control: Some NAS devices demand a certain maximum or minimum fan speed. If the new fan doesn’t have the same or similar maximum or minimum speed, the device may display errors or even shut down.
    • Different starting voltage: Most NAS devices use voltage-based speed control. If the new fan has a higher starting voltage than the original fan, it may not start up right away. This may lead the NAS device to display errors or even shut down because it suspects a fan failure.
    • Different power draw: Some NAS devices monitor the fan’s power draw. If the new fan has a lower power consumption than the stock fan, the device might display errors or even shut down.

    Please note that most NAS manufacturers don’t provide detailed documentation regarding fan compatibility and control, so users who want to replace the fans of their devices usually have to rely on “How to” guides, blog and forum posts or video tutorials. For example, there are excellent video tutorials available for changing the fans in popular Synology NAS models (DS416j, DS1515+ and DS1812+ in English, DS416/DS415/DS916/DS216/DS214 and DS1515+ in German). Please also note that fan compatibility and control can vary from model to model and even from revision to revision even if the devices stem from the same manufacturer. As a result, it is important to make sure that the information or guidelines you rely on when replacing your NAS fan are applicable to your specific model as well as your specific hardware and firmware revision.

    Due to the possible issues listed above, Noctua recommends that only experienced users attempt to replace their NAS fans. Please note that since there are so many different NAS models and most of them lack documentation for aspects such as fan compatibility and control, Noctua customer support cannot assist you with compatibility issues when replacing NAS fans. Please contact your NAS manufacturer for any questions regarding aspects such as the device’s pin alignment or fan monitoring and control.

    Can Noctua fans be used to replace noisy stock fans in switches, routers or other network devices?

    Noctua fans such as the 40, 60, 80 or 92mm NF-A series models are ideal for replacing noisy stock fans in switches, routers and other network devices in order to make them quieter and thousands of users have managed to significantly reduce the noise levels of their units this way. However, while it is easy and straightforward to replace the fans in some cases, it can be very difficult in others, so Noctua strongly recommends that users carefully research if it is possible to easily replace the fan(s) of their network device before purchasing a Noctua fan for this purpose. Some of the common issues that can occur when replacing pre-installed fans are:

    • Different pin assignment: Whereas Noctua fans use the standardised pin assignment for PC fans (see this FAQ for details), some network devices use different assignments. For example, some devices have the power and GND or rpm and PWM pins swapped. Therefore please carefully verify that your device uses the same pin assignment as standard fans. Experienced users may also change the pin assignment by cutting and resoldering the fan cables, but please note that this will void your Noctua manufacturer’s warranty.
    • Different pin functions: Noctua fans use the standardised pin functions for PC fans (see this FAQ for details); however, some network devices use fans where certain pins serve a different function. For example, some devices use the RPM pin for “power good” signals. Therefore please carefully verify that your device uses the same pin functions.
    • Firmware speed control: Some network devices demand a certain maximum or minimum fan speed. If the new fan doesn’t have the same or similar maximum or minimum speed, the device may display errors or even shut down.
    • Different starting voltage: Most network devices use voltage-based speed control. If the new fan has a higher starting voltage than the original fan, it may not start up right away. This may lead the device to display errors or even shut down because it suspects a fan failure.
    • Different power draw: Some network devices monitor the fan’s power draw. If the new fan has a lower power consumption than the stock fan, the device might display errors or even shut down.

    Please note that most network device manufacturers don’t provide detailed documentation regarding fan compatibility and control, so users who want to replace the fans of their devices usually have to rely on “How to” guides, blog and forum posts or video tutorials. Please also note that fan compatibility and control can vary from model to model and even from revision to revision even if the devices stem from the same manufacturer. As a result, it is important to make sure that the information or guidelines you rely on when replacing your fans are applicable to your specific model as well as your specific hardware and firmware revision.

    Due to the possible issues listed above, Noctua recommends that only experienced users attempt to replace their pre-installed fans in network devices. Please note that since there are so many different devices and most of them lack documentation for aspects such as fan compatibility and control, Noctua customer support cannot assist you with compatibility issues when replacing pre-installed fans. Please contact your network device manufacturer for any questions regarding aspects such as the device’s pin alignment or fan monitoring and control.

    Can I use Noctua fans in my system from Acer, Apple, Dell, HP, Lenovo or other major brands?

    Noctua 12V fans comply with the established specifications for standard PC systems issued by Intel and AMD. Systems from Acer, Apple, Dell, HP, Lenovo or other major brands often deviate from these specifications e.g. by using proprietary fan headers, custom pin-alignments or pin-configurations, different methods of fan speed control, etc. This can lead to compatibility issues when using Noctua fans in systems from said brands. Some of these problems can be avoided with some technical knowledge, but especially BIOS related issues (e.g. errors or shutdowns due to low fan speed) can often not be resolved. As a result, Noctua does not officially support systems from Acer, Apple, Dell, HP, Lenovo or other major brands.

    How can I check if my 4-pin fan header supports PWM?

    Some mainboards feature 4-pin fan headers that actually don‘t use a PWM signal on Pin 4 to control the fan speed but rather reduce the voltage on Pin 2 (like a standard 3-pin fan header). As the fan speed at minimum voltage is usually higher than the speed at 20% PWM duty cycle, the fan can not reach as low minimum speeds under voltage control as under PWM control. Please refer to your mainboard manual to check whether or not your mainboard has 4-pin fan headers that control the fan speed by reducing voltage on Pin 2 rather than by changing the PWM duty cycle on Pin 4:

    4 pin fan header types

    Note that mainboard manufacturers use different terms to indicate that Pin 4 is not being used for PWM control (e.g. “+5V”, “VCC” or “NC”), but if one of these terms is used, you can be sure that the fan header does not support PWM. If Pin 4 is described as “Speed Control” or “PWM” or the like, you can be sure that the fan header supports PWM.

    Unfortunately, the description of Pin 2 is not always a clear indication as some manufacturers use terms such as “Fan PWR” or “Power” for both types of fan headers. However, if Pin 2 is described as “Speed Control”, you can also be sure that the fan header does not support PWM based speed control. If Pin 2 is described as “+12V”, this is a clear indication that the fan header supports PWM.

    Please also note that in some cases, the descriptions of the pin layouts in the mainboard manuals may not be correct and some models actually allow you to switch the fan headers from voltage control mode to PWM control mode in the BIOS even though the pin descriptions do not indicate PWM support. We thus recommend to look for these options in the BIOS before taking other measures. In case of doubt, please contact your mainboard manufacturer.


    If your mainboard features other 4-pin fan headers that use PWM for speed control, you can run multiple fans from these headers using Y-split cables. Make sure not to exceed the specified maximum power draw of the fan headers (usually 10-12W) though.

    How should I clean my Noctua fan?

    Fans inside computer cases tend to accumulate dust over longer periods of usage. In order to maintain maximum performance, please clean your fans regularly using a duster, slightly moist tissue or canned air. Please be careful not to use too much force in order to prevent any damage to the fan. Please do not use a vacuum cleaner as this may apply excessive force to the fan and do not put the fan under running water as water residues inside the motor may lead to short circuits.
    In order to ensure flawless operation over many years of usage, Noctua’s premium grade SSO bearings are fully sealed to prevent the entering of fine dust particles. Please note that the fan is not designed to be taken apart by the user. Removing the impeller from the frame will break the sealing of the bearing and results in a loss of warranty.

    How can I find out the direction of airflow and sense of rotation?

    When looking at the fan so that the circular sticker with the Noctua logo is facing you, the direction of airflow is towards you and the sense of rotation is clockwise:

    P14

    What pin configuration do Noctua 12V fans use?

    All Noctua fans feature the standard pin-configurations set out in the Intel and AMD specifications. These standard pin-configurations are used on most mainboards and fan controllers today:

    pin configuration

    Can I run 4-pin PWM fans on 3-pin fan headers?

    PWM fans come with a 4-pin connectors for fully automatic speed control via your mainboard’s 4-pin PWM fan headers. Please note that 4-pin fans can also be connected to your mainboard’s 3-pin fan headers though. When connected to 3-pin fan headers, the fan will run at full speed (unless the mainboard supports voltage based speed control).

    Which Noctua fan or CPU cooler should I buy? How to choose the right model?

    Not sure which Noctua product to buy? Our detailed buying guides for fans and CPU coolers help you to choose the model that works best for you.

    ¿Tiene alguna pregunta sobre uno de nuestros productos? ¡Por favor use este formulario para enviar una pregunta!