heading

Fuera de producción. Modelo sucesorio: NH-C14S

El NH-C14 lleva la refrigeración más avanzada a un nuevo nivel, al ofrecer una configuración de 140 mm flexible, exquisita y única. Los dos ventiladores de 140 mm NF-P14 incluidos se pueden instalar encima o debajo del conjunto de aletas para que el disipador proporcione el máximo rendimiento en modo de doble ventilador, así como en bajo perfil (105 mm) y para disponer del mayor espacio libre posible entre componentes en el modo de ventilador único. Acompañado del premiado compuesto térmico NT-H1 y del sistema de montaje multi-socket SecuFirm2™ de Noctua, el NH-C14 es una solución de primera calidad altamente flexible que lleva aún más lejos el renombrado rendimiento en refrigeración silenciosa de la aclamada serie NH-C12P.

Detalles
Diseño del tipo C para un flujo máximo

Diseño del tipo C para un flujo máximo

El diseño del tipo C con seis heatpipes del NH-C14 posibilita un extraordinario rendimiento en refrigeración silenciosa a la vez que mantiene un perfil mucho más bajo que los disipadores de estilo torre de hoy en día. Asimismo, proporciona un flujo de aire excelente sobre los módulos RAM y los componentes de la placa cercanos al socket.
Dos ventiladores NF-P14 FLX

Dos ventiladores NF-P14 FLX

El NH-C14 viene con dos de los premiados ventiladores de alta calidad NF-P14 de 140 mm, que se pueden ajustar con precisión según las necesidades del usuario a través de los adaptadores Low-Noise (L. N. A.) y Ultra-Low-Noise (U. L. N. A.) incluidos.
Modo de bajo perfil

Modo de bajo perfil

Funcionando con un solo ventilador NF-P14 bajo el conjunto de aletas y eliminando el ventilador superior, el NH-C14 sólo mide 105 mm de alto, que lo hacen idóneo para su uso en cajas pequeñas y aplicaciones HTPC.
Modo de Amplio Espacio

Modo de Amplio Espacio

El ventilador inferior NF-P14 se puede retirar con el objetivo de proporcionar espacio adicional para los disipadores del chipset o de los módulos de la RAM con dispersores de calor de altura elevada. Funcionando con un solo ventilador en la parte superior, el NH-C14 proporciona 65 mm de margen.
Sistema de montaje multisocket SecuFirm2™

Sistema de montaje multisocket SecuFirm2™

El excelente soporte multisocket para entusiastas SecuFirm2™ proporciona gran compatibilidad de socket (LGA 1366, LGA 1156, LGA1155, LGA1150, LGA775, AM2, AM2+, AM3, AM3+, FM1, FM2, FM2+) y cumple con los más elevados requerimientos en seguridad, rendimiento y facilidad de uso.
Compuesto térmico NT-H1

Compuesto térmico NT-H1

El aclamado NT-H1 de Noctua es una solución térmica de gama alta de probada calidad que proporciona una resistencia térmica mínima, gran facilidad de uso y una destacable fiabilidad.
NH-C14
Especificaciones disipador
Intel LGA1366, LGA1156, LGA1155, LGA1150, LGA775, LGA2011 sobre pedido, Asus X-socket™ & AMD AM2, AM2+, AM3 , AM3+, FM1, FM2, FM2+ (backplate necesario)
Altura (sin ventilador)
105 mm
Anchura (sin ventilador)
140 mm
Profundidad (sin ventilador)
166 mm
Altura (con ventilador)
130 mm
Anchura (con ventilador)
140 mm
Profundidad (con ventilador)
166 mm
Peso (sin ventilador)
700 g
Peso (con ventilador/es)
850/1000* g
Material
Cobre (base y heat-pipes), aluminio (aletas de refrigeración), uniones soldadas, niquelado
Tamaño del ventilador
140x140x25mm / 120x120x25mm
Volumen de entrega
  • 2x NF-P14 premium fan
  • Low-Noise Adaptor (L.N.A.)
  • Ultra-Low-Noise Adaptor (U.L.N.A.)
  • NT-H1 high-grade thermal compound
  • SecuFirm2™ Mounting Kits
  • Noctua Metal Case-Badge
Garantía
6 años
Especificaciones ventilador
Modelo
Rodamiento
Velocidad de rotación (+/-10%)
1200 RPM
Velocidad de rotación con L.N.A. (+/-10%)
900 RPM
Velocidad de rotación con U.L.N.A. (+/-10%)
750 RPM
Sonoridad
19,6 dB(A)
Sonoridad con L.N.A.
13,2 dB(A)
Sonoridad con U.L.N.A.
10,1 dB(A)
Potencia
1,2 W
Voltaje
12 V
MTBF
> 150.000 h
NH-C14
30.04.2015 // PCElite.pl
test.gif

NH-C14 Opinión

Jak widać poniżej, chłodzenia procesora powietrzem spisują się bardzo dobrze. Model NH-D14 i NH-C14 sprawdzają się dobrze w stocku jak i w stresie.
Resultado del análisis: "Modele NH-D14 i NH-C14 to bardzo dobre coolery, które posiadają wydajny system chłodzenia, autorski system SecuFirm2, po dwa wentylatory w zestawie, wkrętaki, pasty termoprzewodzące i pełne zestawy montażowe." (Arkadiusz Byś, PCElite.pl)
13.03.2015 // Donanimhaber Forum
test.gif

NH-C14 Opinión

Soğutucudan ses seviyesi noktasında ben memnun kaldım. Fanlar yine Noctua kalitesinde olduğundan dolayı 1200 RPM'de rahatsız edici bir sese sahip değiller. Yine istenirse voltaj düşürücü adaptörler devreye sokulabilir. Macun olarak diğer testlerde de stok macunlarla karşılaştırmaya tuttuğum tabi NT-H1 var.
Resultado del análisis: "Kasanın genişliğiyle ilgili sorun yaşayan kişilere NH-C14'ü rahatlıkla tavsiye edebilirim(tabi bulabilirseniz.) Zira kendi kulvarında pek bir rakibi yok gibi." (Ali Emre Alıcı, Donanimhaber Forum)
05.02.2015 // Tech-Critter.com
test.gif

NH-C14 Opinión

So even if the Noctua NH-C14 didn't deliver the extreme cooling that we normally see from Noctua, it really isn't the game Noctua themselves are playing at here; rather, the key is quiet cooling and they did remarkably well on this area. The dual NF-P14 mounted on the cooler is barely audible over my mechanical HDDs while the system is tested on load.
Resultado del análisis: "Having the C-Type cooler is a key option when building on slim profile chassis like the BitFenix Pandora that we reviewed recently as one have to consider the clearance of the coolers. This is also a great cooling solution when you require that extra draft of air towards your motherboard CPU area, cooling down the components around the CPU area, or rather, the M.2 PCI-E SSD drive thats plugged in close to that area." (Clement Thien, Tech-Critter.com)
04.10.2014 // TechSupportForum.com
test.gif

NH-C14 Opinión

When I compared the NH-C14 to the NH-D15 that I reviewed a while back, the NH-C14 did exceptionally well. While gaming, expect to have an average processor temperature of about 70C (158F), however, your results will vary. Additionally, when at full operational power, noise from the fans is barely noticeable and the room is still peaceful (Or filled with gun fire from your online first-person shooting game).
Resultado del análisis: "Backed by a six year warranty, the NH-C14 is an excellent and well-crafted low profile processor cooler." (Justin Vendette, TechSupportForum.com)
10.08.2014 // HWready.it
test.gif

NH-C14 Opinión

Il modello L9i è davvero molto un prodotto interessante per quanto piccolo fa il suo dovere. I due fratelli maggiori NH-C14 – NH-L12 sono davvero potenti, il modello C14 è un pochino ingombrante, prima di acquistare accertarsi sempre dell’eventuale compatibilità con le RAM, non ci si deve dimenticare che monta 2 ventole da 140mm e questa sua caratterista lo rende anche paurosamente efficiente.
Resultado del análisis: "Solito standard qualitativo di Noctua, l’azienda Autriaca non delude mai. Silenziosi, performanti e di alta qualità, per non parlare dei Bundle sempre completi." (Santoro Luigi, HWready.it)
02.06.2014 // Tweaks.pl
test.gif

NH-C14 Opinión

Jego zaletą jest przede wszystkim wysokość, która umożliwi pracę w komputerach typu HTPC przy zachowaniu topowej wydajności. Wliczając do tego fakt, że montaż jest bardzo prosty, w komplecie otrzymujemy bardzo dobrą pastę, wentylatory są dość ciche i Noctua daje nam sześć lat gwarancji to z czystym sumieniem możemy C14 dać ocenę 5/5 oraz rekomendację w aż trzech kategoriach: jakość, wydajność, kultura pracy!
Resultado del análisis: "Noctua NH-C14 to bardzo udany cooler." (Marcin Żyto, Tweaks.pl)
20.04.2014 // GreenTechReviews
test.gif

NH-C14 Opinión

Так как максимальная скорость вращения вентиляторов составляет 1200 об/мин, то об уровне шума беспокоиться смысла нет — кулер работает очень тихо. А при использовании LNA или ULNA адаптера — вообще бесшумно.
Resultado del análisis: "Даже в абсолютно бесшумном режиме работы Noctua NH-C14 смог остудить пыл разогнанного процессора i7-4770K, эффективно охлаждая ещё и подсистему питания! К достоинствам можно также отнести удобное крепление, общее качество изготовления и богатый комплект поставки. Стоит лишь правильно выбрать материнскую плату и вы получите мощную и тихую систему с возможностью хорошего разгона. И, да, Noctua NH-C14 стоит запрошенную за него сумму денег." (Владимир Солонин, GreenTechReviews.ru)
02.04.2014 // Razorman.net
test.gif

NH-C14 Opinión

Noctua dispone de modelos en su catálogo que podemos categorizar como de los más prestacionales, y sin duda este Noctua NH C-14 es uno de ellos, pues ha demostrado en las pruebas ser un aliado muy eficiente para mantener dentro de unos márgenes de temperaturas excelentes nuestros i5 4670K de pruebas, y todo ello con un silencio de funcionamiento que ya quisieran muchos coolers. El bundle incluido es realmente sobresaliente, no falta ningún elemento para instalar el cooler en cualquier socket de Intel o AMD, y además todos los componentes perfectamente ordenados en bolsas individuales perfectamente señalizadas. Un ejemplo a seguir. La calidad de materiales no merece más que comentarios positivos, es imposible encontrar un defecto a la calidad de diseño y materiales de este Noctua NH-c14.
Resultado del análisis: "Resumiendo: si buscas un cooler de un con un rendimiento impresionante, que además puede instalarse incluso en cajas HTPC ( prescindiendo del ventilador superior ) , y un silencio de funcionamiento de lo mejor de la categoría, sin duda este Noctua NH C-14 debe ser tu eleccion, pero como todo lo bueno se paga, el precio es de unos 85 euros." (Ana Rey Carballeira, Razorman.net)
21.03.2014 // Techno-Kitchen.com
test.gif

NH-C14 Opinión

Resultado del análisis: "Отличный кулер. Высота всего 11,4 см. Без вентилятора - 9 см. Очень тихий вентилятор даже на своих максимальных оборотах. Серебрянная награда от Техно-Кухни." (Konstantin Ivanov, Techno-Kitchen.com)
22.02.2014 // RelaxedTech.com
test.gif

NH-C14 Opinión

People recognize Noctua products when they see one because of the color scheme that they use on their fans and that's what makes Noctua unique from different manufactures. Noctua has gained a lot of positive recognition in the cooling market because of their exceptional CPU coolers and amazing fans. Their outstanding customer service is what sets them apart from every other manufacture. Noctua's innovation with the NH-C12P SE14 and NH-C14 is exactly what the PC enthusiast industry needs and while these coolers might not hold the performance crown in our bench tests, they weren't designed to handle extreme overclocks in the first place. Like we said earlier, these coolers are designed for small enclosures and HTPC applications and that's where they shine. The NH-C14 was able to handle the 3770K at 4.6Ghz relatively well (under 80c) and that says a lot for a cooler that's specifically designed for small enclosures with little airflow.
Resultado del análisis: "Overall, both the NH-C14 and the NH-C12P SE14 come packed with whisper quiet fans and come loaded with a ton of useful accessories. The NH-C14 with two fans running at full speed was inaudible while we were running the 3770K at 4.6Ghz and the same goes for its little brother. Another great thing about Noctua's products is that they come with SecuFirm2 which makes the installation process so easy that it's not even funny." (Henry Peshkepija, RelaxedTech.com)

Manual de instalación (PDF)

Hoja de datos (PDF)

Preguntas frecuentes

The fan clips are almost touching my VGA card!

Is the high weight dangerous for the CPU or socket?

¿Puedo refrigerar mi CPU sin ventilador (de forma pasiva) usando los disipadores Noctua?

Can I use Noctua fans on my fan controller?

In which orientation should top-flow coolers (NH-C series, NH-L12) be installed?

My fan doesn’t spin when I start up the PC - is it faulty?

Can I run Noctua 3-pin fans on 4-pin PWM connectors and use my mainboard’s automatic fan controller?

How can I check whether my case is wide/high enough for the cooler?

Is the cooler compatible with LGA1366 mainboards for Xeon 5500?

My mainboard has more than one set of mounting holes. Which one should I use?

I can't open the socket due to the mounting bars!

Does the package include a backplate for AMD AM2(+)/AM3(+)/FM1/FM2(+)?

The fan clips are almost touching my VGA card!

The fan doesn’t start with the Ultra-Low-Noise Adaptor (ULNA)!

How much clearance for RAM or chipset coolers does the NH-C14 provide?

Is the mounting system compatible with LGA1155?

How can I check whether my AMD mainboard has a standard AMD backplate that’s compatible with the SecuFirm2™ mounting system and how should I proceed with the installation?

Is the cooler compatible with AMD AM3+ and FM1?

Is the cooler compatible with the Intel LGA2011 socket and Asus X-socket™?

How should I clean my Noctua cooler?

Can use the NF-A15 fan on my Noctua CPU cooler?

Is the cooler compatible with AMD FM2+?

¿Qué disipadores de Noctua son compatibles con el socket LGA1150?

I’ve used all the NT-H1 thermal compound that came with the cooler, can you send me more?

Which sockets are supported or can be supported using upgrade kits?

What Thermal Design Power (TDP) is this cooler recommended for and how much Watt (W) of heat can it dissipate?

How to remove the base protection cover?

Should I take the cooler off before transporting my system?

Are there any concerns using Noctua CPU coolers on Intel Skylake (LGA1151) CPUs?

¿Por qué la base de los disipadores Noctua no tiene un acabado pulido como un espejo?

¿Por qué la base de los disipadores Noctua no tiene un acabado pulido como un espejo?

The supplied y-cable is missing a wire at one of the two connectors, is it faulty?

Can I keep using the backplate / mounting system of my previous Noctua cooler for my new one?

The fan clips are almost touching my VGA card!

On some mainboards, the fan clips may be very close to the rear side of VGA cards installed in the first PCI-E slot. In this case, please install the cooler with the bendings of the heatpipe towards the graphics card in order to have more space. Alternatively, you can also insulate the fan clips using duct tape or shrink-on tubes.

P14

Is the high weight dangerous for the CPU or socket?

No. Los disipadores Noctua poseen un sistema de montaje SecuFirm™ extremadamente fiable. Gracias a la conexión mediante tornillos al backplate de la parte posterior de la placa, el exceso de peso -según las recomendaciones de Inter y AMD- común entre los disipadores de gama alta, no tiene objeción posible.

¿Puedo refrigerar mi CPU sin ventilador (de forma pasiva) usando los disipadores Noctua?

Los refrigeradores Noctua no se diseñaron originalmente para su uso pasivo, aunque su capacidad de refrigeración es suficiente en muchos casos. Desafortunadamente, nos es imposible indicar que CPU concreta puede o no puede refrigerarse sin ventilador, pues depende de varios factores, como la temperatura de la caja, la ventilación o la orientación del socket. Generalmente, recomendamos usar un ventilador en primera instancia, y luego ir bajando las revoluciones de forma constante sin dejar de monitorizar la temperatura.

Can I use Noctua fans on my fan controller?

Our fans are compatible with the vast majority of fan controllers on the market. However, there is a compatibility issue with a few models such as the Zalman ZM-MFC2 and Bitfenix Recon, which apply Pulse Width Modulation (PWM) on the 12V line and use an unfavourable PWM carrier frequency. This can create an oscillation when used with certain fans, which will result in the fan speeding up and down. We therefore recommend not using the Zalman ZM-MFC2 or Bitfenix Recon with our fans.

In which orientation should top-flow coolers (NH-C series, NH-L12) be installed?

When using top-flow coolers in a tower-style case, we strongly recommend installing the cooler with the heatpipes in horizontal position or with the bends of the heatpipes pointing downwards. Please avoid installing the cooler with the bends pointing upwards as this may result in reduced cooling performance. In desktop cases, the cooler can be used in any orientation.

Orientation

My fan doesn’t spin when I start up the PC - is it faulty?

If you've connected the fan directly (or using the supplied Low-Noise or Ultra-Low-Noise-Adaptors) to your mainboard, it's possible that the mainboard's automatic fan controller doesn't provide the required starting voltage due to the low CPU temperature. Please verify whether the fan starts spinning at higher CPU temperatures, remove any Low-Noise or Ultra-Low-Noise Adaptors, deactivate your mainboard's automatic fan controller in the BIOS or connect the fan directly to the power supply using the supplied 3:4-pin adaptor.

Can I run Noctua 3-pin fans on 4-pin PWM connectors and use my mainboard’s automatic fan controller?

You can simply connect our fan's 3-pin connector to the 4-pin PWM sockets of today's mainboards so that the fourth pin that transmits the PWM signal is left blank (due to the shape of the connector, there's no danger of reversing polarity). Some mainboards (e.g. current Gigabyte models) are capable of controlling fans not only via PWM, but also by adjusting the supplied voltage. In some cases, this may require you to change BIOS options like "Fan Control Mode" from "PWM" to "Voltage" or "Analog". Please consult your mainboard's manual in this regard. However, some mainboards use an "auto" setting by default that automatically chooses PWM or voltage based regulation according to the connected fan. Automatically controlling the fan speed may not possible on mainboards that pulse the power rather than lowering the fan voltage.

PWM PWM

How can I check whether my case is wide/high enough for the cooler?

Most case manufacturers provide specifications for maximum CPU cooler height/clearance. Please refer to these specifications in order to verify that the cooler will fit the case. If no specifications are available, please contact the case manufactuer or measure the distance from the motherboard tray to the side panel (tower cases) or top panel (desktop cases). If this distance is bigger than the height of the cooler + 15mm (mainboard spacers + mainboard + CPU), the height/width of your case should be sufficient.

Is the cooler compatible with LGA1366 mainboards for Xeon 5500?

Due to the custom NM-I3 backplate, the cooler can not be used on mainboards that have a backplate with screw threads for CPU cooler installation (such as the Intel reference backplate for Xeon 5500). Please choose our NH-U12DX 1366 for these mainboards.

1366 compatibility

My mainboard has more than one set of mounting holes. Which one should I use?

Please always use the standard set of mounting holes that's compliant with your socket type (e.g. 75mm LGA1156 hole spacing on LGA1156 sockets) and parallel to the sides of the socket. Don't use mounting holes which are rotated in relation to the socket.

1366 compatibility

I can't open the socket due to the mounting bars!

Please first loosen one of the two thumbscrews that hold the mounting bars in place. Then untighten the second screw so that you can swivel the mounting bar and open the socket. Depending on the position of the mounting bars, you may need to swivel both.

Open Socket

Open Socket

Does the package include a backplate for AMD AM2(+)/AM3(+)/FM1/FM2(+)?

No. As most AMD mainboards come with a stock backplate preinstalled, the cooler doesn’t include an AMD backplate. If your mainboard doesn’t have a backplate, please contact our support team at support@noctua.at.

amd backplate

The fan clips are almost touching my VGA card!

On some mainboards, the fan clips may be very close to the rear side of VGA cards installed in the first PCI-E slot. Please insulate the fan clips using duct tape or shrink-on tubes in this case.

P14

The fan doesn’t start with the Ultra-Low-Noise Adaptor (ULNA)!

Unfortunately, many Gigabyte mainboards use a special control circuit that can lead to start-up problems in conjunction with the Ultra-Low-Noise Adaptor (ULNA). This control circuit remains active even when automatic fan control is disabled in the BIOS. In these cases, please use the fan without the ULNA or connect it directly to the power supply (or an external fan controller) in order to ensure reliable operation with the ULNA.

How much clearance for RAM or chipset coolers does the NH-C14 provide?

The NH-C14 provides 38mm (Dual Fan Mode and Low Profile Mode) / 65mm (High Clearance Mode) clearance for near-socket components:

C14 Measurements

C14 Measurements

Is the mounting system compatible with LGA1155?

Yes. LGA1155 uses the same hole spacing as LGA1156, so the same SecuFirm2™ mounting system can be used.

How can I check whether my AMD mainboard has a standard AMD backplate that’s compatible with the SecuFirm2™ mounting system and how should I proceed with the installation?

The SecuFirm2™ mounting system requires a standard AMD backplate (either plastic or metal) with screw threads as shown on the pictures below. These backplates are pre-installed on the rear side of most AMD mainboards (see first picture below) and fixed to the retention module with four screws (see second picture below). If your retention module is fixed with plastic bolts instead of metal screws, please contact support@noctua.at in order to obtain an appropriate backplate.

In order to proceed with the installation of your Noctua cooler, please remove the four screws and the retention module but keep the backplate in place so that you can see the screw threads from the top side of the motherboard (see third picture below). You can then proceed with the installation of the SecuFirm2™ mounting kit as described in the manual (see fourth picture below).

AMD backplate

AMD backplate

AMD backplate

AMD backplate



Is the cooler compatible with AMD AM3+ and FM1?

As the hole spacing for CPU cooler installation on AM3+ and FM1 is the same as on AM2, AM2+ and AM3, the cooler is fully compatible with AM3+ and FM1 out of the box and doesn’t require any modifications or upgrades.

Is the cooler compatible with the Intel LGA2011 socket and Asus X-socket™?

The cooler doesn’t come with LGA2011 mounting hardware out of the box, but it can be upgraded to support LGA2011 via the NM-I2011 mounting kit.

Please also note that the cooler is fully compatible with Asus Rampage IV series LGA2011 motherboards that feature Asus X-socket™. Asus X-socket™ models use an interchangeable backplate that makes it possible to install LGA1366 heatsinks, so the cooler is fully compatible with these mainboards out of the box and does not require any upgrades to be installed.

Asus X-socket

In order to install the cooler on Asus X-socket™ mainboards, please first remove the mainboard’s LGA2011 backplate and install the LGA1366 backplate supplied with the mainboard instead (see the mainboard manual for detailed instructions). Then install the Noctua cooler as described in the supplied installation manual for LGA1366. In case you’ve lost the printed installation manual, you can download it here.

How should I clean my Noctua cooler?

Dust: Fans and heatsinks inside computer cases tend to accumulate dust over longer periods of usage. In order to maintain maximum performance, please clean your fan and heatsink regularly. For cleaning, please first remove the fan from the heatsink and clean it using a duster, slightly moist tissue or canned air. Please be careful not to use too much force in order to prevent any damage to the fan. Please do not use a vacuum cleaner as this may apply excessive force to the fan and do not put the fan under running water as water residues inside the motor may lead to short circuits. Please also note that the fan is not designed to be taken apart by the user. Removing the impeller from the frame will break the sealing of the bearing and results in a loss of warranty. Before reinstalling the fan, clean the heatsink itself with a duster or vacuum cleaner. Do not use water to clean the cooler. Finally put the fan back on and connect it to your motherboard fan header or fan controller.
Thermal paste residues: Whenever you take off the heatsink from the CPU, we recommend to clean the CPU as well as the base of the cooler before re-applying thermal paste and re-installing the cooler. You can either just wipe the base and the CPU clean with a dry, lint-free tissue or, for more thorough cleaning, use a lint-free tissue moistened with either a mild solution of washing-up liquid or isopropyl alcohol. Do not put the cooler or CPU under running water. Note that both the base of the heatsink and the CPU should be dry, free from residues of thermal compound and free from grease before re-applying thermal paste and re-installing the cooler.

Can use the NF-A15 fan on my Noctua CPU cooler?

The NF-A15 is fully compatible with the NH-U12P, NH-C12P and NH-C12P SE14. On the NH-D14 and NH-C14, the NF-A15 fan can only be installed using optional fan clips. For this, please contact our customer service.

Is the cooler compatible with AMD FM2+?

As the hole spacing for CPU cooler installation on FM2+ is the same as on AM2, AM2, AM3(+), FM1 and FM2, the cooler is fully compatible with FM2+ out of the box and doesn’t require any modifications or upgrades.

¿Qué disipadores de Noctua son compatibles con el socket LGA1150?

El montaje es idéntico en todos los sockets LGA115x (LGA1150, LGA1155, LGA1156). Los siguientes disipadores son compatibles con el LGA1150 y no necesitan ningún tipo de actualización para utilizarlos en esta plataforma: NH-C12P SE14, NH-C14, NH-D15, NH-D14, NH-L12, NH-L9i, NH-U14S, NH-U12S, NH-U12P SE2, NH-U9B SE2. Además, todos los modelos anteriores que se hayan actualizado con el kit NM-I3 pueden utilizarse en el LGA1150 sin tener que volver a actualizarlos.

Los siguientes disipadores pueden ser compatibles con el LGA1150 si se utiliza el kit de actualización NM-i115x y son adecuados para el kit de montaje gratuito de Noctua: NH-C12P, NH-U12, NH-U12F, NH-U12P, NH-U12P SE1366, NH-U9, NH-U9F, NH-U9B.

Los siguientes disipadores pueden ser compatibles con el LGA1150 si se utiliza el kit de actualización NM-i115x pero no son adecuados para el kit de montaje gratuito de Noctua: disipadores de la serie DX para Xeon, NH-D14 SE2011.

Los siguientes disipadores son mecánicamente incompatibles con el kit de actualización NM-i115x y no son compatibles con el LGA1150: disipadores de la serie DO para AMD Opteron, NH-L9a.

I’ve used all the NT-H1 thermal compound that came with the cooler, can you send me more?

Please kindly note that the NT-H1 thermal compound supplied with our coolers is a consumable item so our manufacturer’s warranty does not include providing additional thermal compound. You can purchase NT-H1 from our resellers.

Which sockets are supported or can be supported using upgrade kits?

Please refer to our socket compatibility chart.

What Thermal Design Power (TDP) is this cooler recommended for and how much Watt (W) of heat can it dissipate?

Please refer to our TDP guide for information on maximum recommended TDP and heat dissipation.

How to remove the base protection cover?

Noctua CPU coolers are shipped with a plastic protection cover at the bottom side of the cooler, which protects the contact surface against scratches and other damage.

The base of Noctua CPU coolers is made from hard-wearing nickel plated copper, so there's nothing to worry about if you buy a Noctua cooler from second hand or if your cooler didn't come with a protection cover. Please proceed with the installation as explained in the manual.

You can simply remove the cover as shown below:

Base Protection Cover

Should I take the cooler off before transporting my system?

As it is not possible to reliably calculate or control the forces that act upon a system during transport (e.g. in shipping), we generally recommend, for safety reasons, taking the cooler off. Noctua cannot be held responsible for any damage that may arise due to excessive stress during transport if you keep the heatsink installed.

Are there any concerns using Noctua CPU coolers on Intel Skylake (LGA1151) CPUs?

Our SecuFirm2™ mounting systems undergo comprehensive compatibility tests before being approved for new platforms. We have neither detected any problem with regard to the Intel LGA1151 platform (“Skylake”) during these tests nor have we received any reports from our customers, sales partners and system integrators that would indicate any possible issue. Our SecuFirm2™ mounting systems (with the exception of some compact L-type models) rely on coil springs to create the required contact pressure, which gives a certain flexibility both with regards to tolerances in stackup height and shocks or other forces. Compared to spring-less mounting systems, which exclusively rely on the bending of the mounting brackets in order to create contact pressure, this allows to reduce the mechanical stress on CPU, socket and motherboard and thus helps to prevent possible damage from excessive forces. However, as it is not possible to reliably calculate or control the forces that act upon a system during transport (e.g. in shipping), we generally recommend, due to safety reasons, to take off coolers with a total weight of more than 700g (incl. fan).

¿Por qué la base de los disipadores Noctua no tiene un acabado pulido como un espejo?

Teniendo en cuenta que mayoría de los entusiastas del hardware usan compuestos térmicos de alta viscosidad, la superficie de la base de los disipadores Noctua se ha optimizado para el uso de este tipo de pastas térmicas. Las micro-hendiduras de la superficie de la base de los disipadores Noctua aseguran que los compuestos térmicos de alta viscosidad se dispersen de manera uniforme en una fina capa por toda la zona de contacto y que no queden huecos entre el disipador y la CPU. Con un acabado pulido como un espejo, el riesgo de una dispersión desigual es mucho más alto. Dado que las capas demasiado gruesas de pasta térmica y los huecos con aire deterioran dramáticamente la transferencia térmica, las micro-hendiduras son de vital importancia en el rendimiento general de los disipadores Noctua cuando se usan con compuestos térmicos de alta viscosidad.

¿Por qué la base de los disipadores Noctua no tiene un acabado pulido como un espejo?

Teniendo en cuenta que mayoría de los entusiastas del hardware usan compuestos térmicos de alta viscosidad, la superficie de la base de los disipadores Noctua se ha optimizado para el uso de este tipo de pastas térmicas. Las micro-hendiduras de la superficie de la base de los disipadores Noctua aseguran que los compuestos térmicos de alta viscosidad se dispersen de manera uniforme en una fina capa por toda la zona de contacto y que no queden huecos entre el disipador y la CPU. Con un acabado pulido como un espejo, el riesgo de una dispersión desigual es mucho más alto. Dado que las capas demasiado gruesas de pasta térmica y los huecos con aire deterioran dramáticamente la transferencia térmica, las micro-hendiduras son de vital importancia en el rendimiento general de los disipadores Noctua cuando se usan con compuestos térmicos de alta viscosidad.

The supplied y-cable is missing a wire at one of the two connectors, is it faulty?

No. As mainboards can process only one rpm-signal per fan header, it would cause problems if the cable transmitted rpm-signals of both fans. For this reason, one of the two connectors does not have an rpm wire and only the fan on the other connector will transmit an rpm signal. Automatic speed control of both fans will work independent from the second fan’s rpm signal.

Can I keep using the backplate / mounting system of my previous Noctua cooler for my new one?

Most Noctua SecuFirm™ mounting parts are cross-compatible, so if you’re replacing one Noctua cooler with another, it is usually possible to keep the original backplate and/or mounting system in place in order to re-use it for the new cooler. If you had your previous Noctua cooler installed on an Intel LGA115x (LGA1156, LGA1155, LGA1151, LGA1150), LGA2011 (LGA2011-0, LGA2011-3) or LGA1366 system and replace it with an NH-U14S, NH-U12S or NH-U9S, you only need to replace the original mounting bars with the NM-IMB3 ones supplied with the new cooler. For all other models, you can keep the entire mounting system in place on the aforementioned Intel sockets. On AMD AM2, AM2+, AM3, AM3+, FM1, FM2, FM2+, you only need to replace the original mounting bars with the ones supplied with the new cooler.

¿Tiene alguna pregunta sobre uno de nuestros productos? ¡Por favor use este formulario para enviar una pregunta!