heading
Conceived for industrial heavy-duty applications that require enhanced cooling performance and advanced ingress protection, the NF-A14 industrialPPC (Protected Performance Cooling) is a ruggedised high-speed version of the award-winning retail model. The 24V Q100 variant uses Noctua’s AEC-Q100 qualified wide input range NE-FD4 motor driver IC in order to support 24V-based industrial and automotive applications. Its sophisticated inrush current suppression and extreme electrical robustness with extended burst and surge immunity allow it to operate safely in sensitive or hostile electronic environments. Thanks to the outstanding aerodynamic efficiency of the NF-A14 design and the use of a novel three-phase motor, the industrialPPC version provides superior airflow and pressure capacity while keeping noise and power consumption at a moderate level as against comparable high-speed fans. While its fibre-glass reinforced polyamide construction and certified water and dust protection make the NF-A14 industrialPPC suitable for operation in challenging surroundings, the renowned SSO2 bearing technology guarantees an MTBF of over 150,000hrs. Topped off with Noctua’s trusted reliability and 6-year manufacturer’s warranty, the NF-A14 industrialPPC is an ideal choice for highly demanding applications that require superior flow rates and ultimate dependability.
Details |
Award-winning NF-A14 design
Having received more than 100 awards and recommendations from the international press, Noctua's NF-A14 has become a proven premium choice for 140mm cooling needs. Its renowned efficiency has convinced tens of thousands of customers all over the world.
|
3000rpm industrialPPC version
Running twice as fast as the 1500rpm retail version, the NF-A14 industrialPPC-3000 provides extreme airflow and pressure performance. Combined with the industrialPPC series' robust polyamide construction and advanced protection features, this makes the fan ideal for challenging industrial applications.
|
24V version
The industrialPPC 24V Q100 models use Noctua's NE-FD4 three-phase PWM motor driver IC. Supporting operating voltages from 6 to 30V, these models are ideal for 24V-based industrial applications and voltage- or PWM-based speed control.
|
Lower speed and noise levels in 12V PC environments
While the industrialPPC 24V model has been designed with 24V industrial applications in mind, it runs at a maximum speed of around 1800rpm in 12V PC environments and can be slowed down further via PWM, thus combining industrialPPC features and design with Noctua’s signature quietness.
|
NE-FD4 PWM IC with SCD
Supporting fully automatic PWM speed control, the fan uses Noctua’s custom-designed NE-FD4 PWM IC for 24V three-phase motors. The NE-FD4 is AEC-Q100 qualified and integrates Noctua's proprietary Smooth Commutation Drive (SCD) technology, which suppresses PWM switching noise and thus makes the fan quieter at lower speeds.
|
AEC-Q100 qualification
The 24V Q100 version’s NE-FD4 motor driver IC complies with the Automotive Electronics Council’s highly rigorous AEC-Q100 failure-mechanism-based stress test qualification for integrated circuits, which makes the fan ideal for use in automotive applications.
|
High electrical robustness
Meeting the AEC-Q100 standard’s stringent requirements for burst and surge protection, the 24V Q100 version’s high electrical robustness permits the fan to be used not only in automotive projects but also in other harsh environments with transients from electric motors and other inductive switching loads.
|
Inrush current suppression
The fan’s voltage-stabilised inrush current suppression provides a smooth power-up and dramatically reduces power line transients that otherwise could affect other electronic components connected to the power line. This makes the fan safe to use in sensitive electronic environments.
|
Three-phase motor design
While most axial fans use single-phase motors with 4 slots, Noctua's industrialPPC fans feature a three-phase design with 6 slots, which provides smoother transitions between the slots and thus allows for even higher running smoothness, further reduced vibrations and unprecedented energy efficiency.
|
Certified IP67 water- and dust protection
The motor and PCB of the IP67 version are completely cast in a special, highly heat conductive resin that combines thoroughgoing protection and effective motor heat dissipation. Complying with the ingress protection rating IP67, this fan is not only fully dust tight but also completely waterproof up to 1m water depth.
|
Fibre-glass reinforced polyamide construction
Both the impeller and the frame of Noctua’s industrialPPC fans are made entirely from fibre-glass reinforced polyamide. This material can withstand temperatures up to 140°C and makes the fans even more robust and break-proof than Noctua’s standard fibre-glass reinforced PBT fans.
|
Flow Acceleration Channels
The NF-A14 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.
|
AAO frame
Noctua's AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua's proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan's performance/noise efficiency.
|
Stepped Inlet Design
Noctua's Stepped Inlet Design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.
|
Inner Surface Microstructures
With the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.
|
Integrated anti-vibration pads
Integrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and other mounting systems.
|
SSO2 Bearing
The NF-A14 industrialPPC features the further optimised second generation of Noctua's renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.
|
Metal bearing shell
In order to guarantee the highest possible degree of manufacturing precision, minimum tolerance and excellent long-term stability, the NF-A14 industrialPPC sports a CNC milled bearing shell made entirely from brass.
|
6-year manufacturer’s warranty
Noctua fans are renowned for their impeccable quality and outstanding longevity. Like all Noctua fans, the NF-A14 industrialPPC features an MTTF rating of more than 150.000 hours and comes with a full 6-year manufacturer’s warranty.
|
Customisable for industry clients
For industry clients, various features, certificates, packaging options and accessories can be customised on requests. For example, we can provide different connectors and speeds, different cable length or UL and TÜV certification. Please feel free to contact us for customised offers!
|
|
||
|
Size
140x140x25 mm
|
||
|
Mounting hole spacing
124,5x124,5 mm
|
||
|
4-pin PWM
|
||
|
Cable length
40cm
|
||
|
Bearing
|
||
|
Blade geometry
A-Series with Flow Acceleration Channels
|
||
|
Frame technology
|
||
|
Material
Fibre-glass reinforced polyamide
|
||
|
Ingress protection
IP67
|
||
|
Motor type
|
||
|
Rotational speed (+/- 10%)
3000 RPM
|
||
|
Min. rotational speed (PWM, +/-20%)
800 RPM
|
||
|
Rotational speed @ 12V (+/- 10%)
1800 RPM
|
||
|
Acoustical noise
41,3 dB(A)
|
||
|
Static pressure
10,52 mm H₂O
|
||
|
Max. input power
7,92 W
|
||
|
Max. input current
0,33 A
|
||
|
Operating voltage
24 V
|
||
|
MTTF
> 150.000 h
|
||
|
Scope of delivery
|
||
|
6 years
|
|
|||||||
|
|
NF-A14 industrialPPC-24V-3000 Q100 IP67 PWM Review
W porównaniu do konkurencji od Scythe, wentylatory Noctua wypadają bardzo dobrze w obu zastosowaniach. Należy jednak pamiętać, że są one 3 razy droższe więc takie wyniki są spodziewane. Śmigła od Noctuy w wersji szybszej są dosyć głośne, natomiast w wersji wolniejszej są nawet ciche.
Nowe śmigła od Noctuy zastępują starą wersję, więc cena zostaje zachowana na starym poziomie. W stosunku do poprzedników posiadają one jedno ulepszenie – zgodność z AEC-Q100. Dodając do tego IP67 otrzymujemy wentylator, który może pracować w każdych warunkach i zapewnia pełnię bezpieczeństwa. Co więcej posiada on duży zakres pracy z napięciami wchodzącymi więc można dobrze dopasować obroty w wielu zastosowaniach, nie tylko komputerowych.
|
||||||
|
Test verdict: "Aktualnie są to najbezpieczniejsze wentylatory na rynku więc zdecydowanie polecam ich zakup, w szczególności do specjalizowanych zastosowań."
(Michał Andruszkiewicz, WhatNext.pl)
|
|||||||
|
|||||||
|
|
NF-A14 industrialPPC-24V-3000 Q100 IP67 PWM Review
As much as these two fans may look like a standard PC fan, they are industrial fans, so it is a bit hard to compare them to a typical PC fan. Will they work in your home PC? Sure - they will work just fine, but you will never get them to run at their maximum rated speeds on the 12V from the PSU in your home system. You need 24V to get the maximum speeds and that of course requires a dedicated external 24V power source. Who would go to that much trouble and expense when Noctua has a full line of case and cooler fans that are just perfect for your PC?
These industrialPPC fans are intended for use in an industrial environment where 24V is typically available. Moisture and dirt are often encountered in an industrial environment and that is exactly where these fans are best used. The IP67 rating ensures that the internal components are protected and these fans are up to the task of reliably moving air in an industrial application. The AEC-Q100 qualification ensures that these fans meet the failure-mechanism-based stress tests for integrated circuits.
|
||||||
|
Test verdict: "Most people won't ever have a need for an industrial type of fan, but if you do, then these need to be on your list." (Chris Dawalt, OverclockersClub.com)
|
|||||||
|
|||||||
|
|
NF-A14 industrialPPC-24V-3000 Q100 IP67 PWM Review
Noctua is known as one of the elites in the PC cooling hardware community. They have multiple award winning products and are always at the top of the performance lists. For this grouping of fans I expected much of the same. Overall I do believe that Noctua delivers. There should be no doubt that a cooling fan from Noctua is going to be a high quality product. The industrialPPC Q100 140mm and industrialPPC Q100 120mm provided for this review confirmed this, and showed that even in the narrower field of 120mm and 140mm fans that there are plenty of things you can do to distinguish one model from another.
|
||||||
|
Test verdict: "The fans are all high quality and will help keep your system cool. You can tell from the list of features just how much engineering and testing has gone into making these fans as efficient as possible." (Ambrosidou Nat, XtremeSystems.org)
|
|||||||
|
|||||||
|
|
NF-A14 industrialPPC-24V-3000 Q100 IP67 PWM Review
Es difícil hacer reviews de marcas como Noctua, y es que es difícil sacarle pegas a algo que se ha hecho con tantísimo mimo, buscando los mejores materiales e intentando mejorar, con resultado positivo, productos dignos de matrícula de honor. Sin duda invertir en Noctua siempre es una buena opción. En lo que respecta a los Noctua NF-A14 industrialPPC 24v Q100 IP67 PWM encontramos ventiladores diseñados para trabajar en las peores condiciones y, aún así, ofrecer un rendimiento excepcional. Si trasladamos esto a un entorno menos hostil, como es nuestro PC, está claro que el resultado va a ser simplemente increíble, un rendimiento excepcional con una sonoridad prácticamente inaudible en la versión de 2000rpm y algo más notoria en la versión de 3000 rpm pero, como viene siendo habitual, mucho inferior a lo esperado en un ventilador que funciona a estos regímenes de revoluciones.
|
||||||
|
Test verdict: "Por todo esto otorgamos los galardones de Producto Premium, calidad Precio y producto recomendado a los Noctua NF-A14 industrialPPC 24v Q100 IP67 PWM" (Miguel G. Mingorance, GameIT.es)
|
|||||||
|
|||||||
|
|
NF-A14 industrialPPC-24V-3000 Q100 IP67 PWM Review
Вентиляторы Noctua NF-A14 industrialPPC-24V-2000 Q100 IP67 PWM и NF-A14 industrialPPC-24V-3000 Q100 IP67 PWM сочетают в себе высочайшее качество исполнения, класс защиты IP67, соответствие стандарту AEC-Q100, отличную эффективность, возможность автоматического управления при напряжениях 24 и 12 В. У новинок на данный момент просто не существует аналогов в качестве корпусных решений в промышленной сфере, где условия работы оборудования далеки от офисных и требуется максимально возможная эффективность и устойчивость компонентов к пыли, влаге и сильному нагреву.
|
||||||
|
Test verdict: "Обновлённые вентиляторы industrialPPC являются непревзойдёнными решениями в своём классе!"
Владимир
Солонин,
GreenTechReviews.ru)
|
|||||||
|
|||||||
|
|
NF-A14 industrialPPC-24V-3000 Q100 IP67 PWM Review
Siamo giunti alla fine della nostra recensione, come al solito il produttore austriaco ha mantenuto le promesse, creando un prodotto di lavorare in condizioni estreme. Queste ventole sono garantite ben 6 anni, segno che il prodotto vanta affidabilità da vendere. Noi di HWR di solito ci occupiamo del mondo PC, quindi spieghiamo in due parole la faccenda alimentazione, queste essendo alimentate a 24V funzioneranno anche a 12V ma con delle limitazioni in velocità. Nella pagina dei test troverete la velocità massima raggiungibile con entrambi i voltaggi.
|
||||||
|
Test verdict: "Concludiamo assegnando a questi prodotti cinque stelle per l’alta affidabilità!" (Mauro Santoro, HWready.it)
|
|||||||
NA-SAV4
- 16 NA-AV4 silicone anti-vibration mounts for up to 4 fans
- Flat case-side end for clean exterior look
- 5 defined, numbered pawls
- Compatible with all Noctua fans
You can either buy from our local sales partners or directly from us via our official Amazon and eBay stores:
Information Sheet (PDF)
FAQs
Can industrialPPC fans be used with fan controllers and resistor cables (Low-Noise Adaptors)?
How much torque should be used for fan screws?
Can I use Noctua fans in my system from Acer, Apple, Dell, HP, Lenovo or other major brands?
How can I check if my 4-pin fan header supports PWM?
Can I use Low-Noise Adaptors with y-cables / multiple fans?
How should I clean my Noctua fan?
Can I run 4-pin PWM fans on 3-pin fan headers?
Can I disassemble my fan for cleaning (or other purposes, e.g. painting)?
Which Noctua 140mm fans are optimised for airflow, which are optimised for static pressure?
Are industrialPPC fans as quiet as other Noctua fans?
What pin configuration do Noctua 24V fans use?
Can I use Low-Noise Adaptors for industrialPPC fans?
My fan doesn’t spin when I start up the PC - is it faulty?
Which Noctua fan or CPU cooler should I buy? How to choose the right model?
Can industrialPPC fans be used with fan controllers and resistor cables (Low-Noise Adaptors)?
Noctua recommends not to use industrialPPC fans with common PC fan controllers, resistor cables (Low-Noise Adaptors) or other devices such as potentiometers that work by applying (variable) resistance rather than actually generating different voltages such as a laboratory power supply does. Due to the higher internal resistance of the industrialPPC fans’ three phase motor, applying additional resistance will cause the fans not to start (e.g. with Low-Noise Adaptors) or to have high starting speeds (e.g. with most common PC fan controllers). Please note that the industrialPPC fans feature starting voltages between 5.5V and 6V and can be run at these voltages on devices such as laboratory power supplies or mainboard fan controllers which actually generate lower voltages rather than applying resistance. Noctua thus recommends to use either PWM or voltage based mainboard fan control or laboratory/industrial power supplies for controlling the speed of industrialPPC fans.
| 4-pin PWM | 3-pin | |
| Mainboard fan control PWM based |  |
 |
| Mainboard fan control voltage based | |
|
| Resistor cables (Low-Noise Adaptors) | |
|
| Common PC fan controllers | (high starting speed) |
(high starting speed) |
| Laboratory/industrial power supplies | |
|
Where can I find a technical documentation and specifications of the PWM speed control system of Noctua’s fans?
While using PWM (Pulse Width Modulation) based fan speed control in PC environments is usually straightforward and does not require any background knowledge, it can be vital when it comes to controlling fans via PWM in other environments. Please refer to our specification white paper for a detailed technical documentation of the PWM speed control features of Noctua’s 4-pin PWM fans. Detailing aspects such as connector types, pin configuration or RPM speed signal output as well as signal specifications and circuit design questions, it enables engineers to implement PWM based speed control for Noctua fans in custom circuit designs and applications.
How much torque should be used for fan screws?
Please use 0.6Nm to tighten fan screws. Make sure not to overtighten the screws as this may damage the fan frame.
Can I use Noctua fans in my system from Acer, Apple, Dell, HP, Lenovo or other major brands?
Noctua 12V fans comply with the established specifications for standard PC systems issued by Intel and AMD. Systems from Acer, Apple, Dell, HP, Lenovo or other major brands often deviate from these specifications e.g. by using proprietary fan headers, custom pin-alignments or pin-configurations, different methods of fan speed control, etc. This can lead to compatibility issues when using Noctua fans in systems from said brands. Some of these problems can be avoided with some technical knowledge, but especially BIOS related issues (e.g. errors or shutdowns due to low fan speed) can often not be resolved. As a result, Noctua does not officially support systems from Acer, Apple, Dell, HP, Lenovo or other major brands.
How can I check if my 4-pin fan header supports PWM?
Some mainboards feature 4-pin fan headers that actually don‘t use a PWM signal on Pin 4 to control the fan speed but rather reduce the voltage on Pin 2 (like a standard 3-pin fan header). As the fan speed at minimum voltage is usually higher than the speed at 20% PWM duty cycle, the fan can not reach as low minimum speeds under voltage control as under PWM control. Please refer to your mainboard manual to check whether or not your mainboard has 4-pin fan headers that control the fan speed by reducing voltage on Pin 2 rather than by changing the PWM duty cycle on Pin 4:
Note that mainboard manufacturers use different terms to indicate that Pin 4 is not being used for PWM control (e.g. “+5V”, “VCC” or “NC”), but if one of these terms is used, you can be sure that the fan header does not support PWM. If Pin 4 is described as “Speed Control” or “PWM” or the like, you can be sure that the fan header supports PWM.
Unfortunately, the description of Pin 2 is not always a clear indication as some manufacturers use terms such as “Fan PWR” or “Power” for both types of fan headers. However, if Pin 2 is described as “Speed Control”, you can also be sure that the fan header does not support PWM based speed control. If Pin 2 is described as “+12V”, this is a clear indication that the fan header supports PWM.
Please also note that in some cases, the descriptions of the pin layouts in the mainboard manuals may not be correct and some models actually allow you to switch the fan headers from voltage control mode to PWM control mode in the BIOS even though the pin descriptions do not indicate PWM support. We thus recommend to look for these options in the BIOS before taking other measures. In case of doubt, please contact your mainboard manufacturer.
If your mainboard features other 4-pin fan headers that use PWM for speed control, you can run multiple fans from these headers using Y-split cables. Make sure not to exceed the specified maximum power draw of the fan headers (usually 10-12W) though.
Note that mainboard manufacturers use different terms to indicate that Pin 4 is not being used for PWM control (e.g. “+5V”, “VCC” or “NC”), but if one of these terms is used, you can be sure that the fan header does not support PWM. If Pin 4 is described as “Speed Control” or “PWM” or the like, you can be sure that the fan header supports PWM.
Unfortunately, the description of Pin 2 is not always a clear indication as some manufacturers use terms such as “Fan PWR” or “Power” for both types of fan headers. However, if Pin 2 is described as “Speed Control”, you can also be sure that the fan header does not support PWM based speed control. If Pin 2 is described as “+12V”, this is a clear indication that the fan header supports PWM.
Please also note that in some cases, the descriptions of the pin layouts in the mainboard manuals may not be correct and some models actually allow you to switch the fan headers from voltage control mode to PWM control mode in the BIOS even though the pin descriptions do not indicate PWM support. We thus recommend to look for these options in the BIOS before taking other measures. In case of doubt, please contact your mainboard manufacturer.
If your mainboard features other 4-pin fan headers that use PWM for speed control, you can run multiple fans from these headers using Y-split cables. Make sure not to exceed the specified maximum power draw of the fan headers (usually 10-12W) though.
Can I use Low-Noise Adaptors with y-cables / multiple fans?
Yes, Low-Noise Adaptors (L.N.A.s) can be used with y-cables, but please make sure to use one L.N.A. per fan and to place the L.N.A.s between the y-cable and the fans as shown below. Never use one L.N.A. for two (or more fans) by placing it between the mainboard and the y-cable!
How should I clean my Noctua fan?
Fans inside computer cases tend to accumulate dust over longer periods of usage. In order to maintain maximum performance, please clean your fans regularly using a duster, slightly moist tissue or canned air. Please be careful not to use too much force in order to prevent any damage to the fan. Please do not use a vacuum cleaner as this may apply excessive force to the fan and do not put the fan under running water as water residues inside the motor may lead to short circuits.
In order to ensure flawless operation over many years of usage, Noctua’s premium grade SSO bearings are fully sealed to prevent the entering of fine dust particles. Please note that the fan is not designed to be taken apart by the user. Removing the impeller from the frame will break the sealing of the bearing and results in a loss of warranty.
In order to ensure flawless operation over many years of usage, Noctua’s premium grade SSO bearings are fully sealed to prevent the entering of fine dust particles. Please note that the fan is not designed to be taken apart by the user. Removing the impeller from the frame will break the sealing of the bearing and results in a loss of warranty.
Can I run 4-pin PWM fans on 3-pin fan headers?
PWM fans come with a 4-pin connectors for fully automatic speed control via your mainboard’s 4-pin PWM fan headers. Please note that 4-pin fans can also be connected to your mainboard’s 3-pin fan headers though. When connected to 3-pin fan headers, the fan will run at full speed (unless the mainboard supports voltage based speed control).
Can I disassemble my fan for cleaning (or other purposes, e.g. painting)?
In order to ensure flawless operation over many years of usage, all Noctua fans come with a premium grade SSO bearing, which is fully sealed to prevent the entering of fine dust particles. Please note that the fan is not designed to be taken apart by the user. Removing the impeller from the frame will break the sealing of the bearing and results in a loss of warranty.
It is thus recommended to clean your fans using a duster, slightly moist tissue or canned air. Please be careful not to use too much force in order to prevent any damage to the fan. Please don’t use a vacuum cleaner as this may apply excessive force to the fan.
It is thus recommended to clean your fans using a duster, slightly moist tissue or canned air. Please be careful not to use too much force in order to prevent any damage to the fan. Please don’t use a vacuum cleaner as this may apply excessive force to the fan.
Which Noctua 140mm fans are optimised for airflow, which are optimised for static pressure?
Noctua only distinguishes between airflow optimised and pressure optimised fans in its 120mm range (see this page for details). For 140mm fans, there is no such distinction: Both the NF-A14 and the NF-P14 redux models are true all-rounders that provide outstanding levels of airflow and static pressure. Either of them works excellent both for case cooling and for use on radiators and heatsinks.
Are industrialPPC fans as quiet as other Noctua fans?
The industrialPPC models are high-speed fans for industrial heavy duty applications that require enhanced cooling performance. While their outstanding aerodynamic efficiency allows keeping noise levels moderate as against comparable high-speed fans, it is inevitable that the faster industrialPPC models are louder than the slower standard models when compared at their respective maximum speeds. For example, the standard NF-F12 PWM emits a noise level of 22.6dB(A) at its maximum speed of 1500rpm whereas the NF-F12 industrialPPC-2000 PWM emits a noise level of 29.7dB(A) at its maximum speed of 2000rpm. When both fans are adjusted to the same speed via PWM or voltage control though, the noise level is similar (except for the fact that the industrialPPC fans' high-speed motors can be slightly audible at close range when running at speeds below around 1000rpm). If you want to reduce the noise levels of industrialPPC fans, we therefore recommend reducing the speed via motherboard fan control or our NA-FC1 fan controller. If you don’t need the extended performance headroom of the high-speed industrialPPC fans, we recommend using our standard, chromax or redux line models as these provide excellent quietness of operation without speed reduction.
What pin configuration do Noctua 24V fans use?
The pin configuration of Noctua 24V fans is identical to 12V fans:
Can I use Low-Noise Adaptors for industrialPPC fans?
No, Low-Noise Adaptors are not compatible with Noctua’s industrialPPC series.
My fan doesn’t spin when I start up the PC - is it faulty?
If you've connected the fan directly (or using the supplied Low-Noise or Ultra-Low-Noise-Adaptors) to your mainboard, it's possible that the mainboard's automatic fan controller doesn't provide the required starting voltage due to the low CPU temperature. Please verify whether the fan starts spinning at higher CPU temperatures, remove any Low-Noise or Ultra-Low-Noise Adaptors, deactivate your mainboard's automatic fan controller in the BIOS or connect the fan directly to the power supply using the supplied 3:4-pin adaptor.
Which Noctua fan or CPU cooler should I buy? How to choose the right model?
Not sure which Noctua product to buy? Our detailed buying guides for fans and CPU coolers help you to choose the model that works best for you.
Do you have a question concerning one of our products? Please use this form to pose a question!
